Schedule

Wed 4th Oct + Thu 5th Oct 2017

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: Model Management
Tag: Business Strategy and Leadership
Tag: Coding, Content and Customisation
Tag: Infrastructure
Tag: Construction and Fabrication
Tag: Estimation
Tag: General
Tag: MEP
Tag: Operations and Maintenance
Tag: Planning
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
Tag: Computational Design
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
11:00 pm
11:30 pm
Wed 4th
Wed 4th
Wed 4th
Certification Exam 1
1:00 pm - 3:00 pm
Certification Exam 1
1:00 pm - 3:00 pm
 
 

Open Door Sessions
3:00 pm - 6:00 pm
Open door sessions
Open Door Sessions
3:00 pm - 6:00 pm
Open door sessions
Architecture, Model Management, Planning

01.OPEN BIM
ÅRSTIDERNE NIRAS CUBO
Structuring model data by using Open Standards, IFC and Building Smart. Open BIM support a data structure where participants work in different software, but towards a common model in IFC. Use of OPEN BIM as basis for property definitions, quality control and in the exchange process.

02.COLLABORATION - FULLY BOOKED
SHL LINK SØREN JENSEN
Working on a 170.000 m2 hospital project demands a high focus on collaboration and BIM-workflows. Get a unique insight in collaboration, design, deliverables and project management with ICT and BIM as the key driver. 7 firms across multiple disciplines, with a total of 85 employees representing this project as Indigo Konsortiet.
TAGS: Architecture, Model Management, Planning

03.COLLABORATION
RAMBØLL C.F. MØLLER AART
Reality check! When all BIM collaboration is virtual in the cloud, why sit side by side in a common project office? Family office = family problems vs Huge organization = HUGE PROBLEMS!!(?) Get a reality check on large scale project collaboration presented by three awesome consultants.
TAGS: Business Strategy and Leadership, Model Management, Visualisation, General

04.CONSTRUCTION SITE - FULLY BOOKED
NCC MT HØJGAARD
A guided tour into the digital universe of the contractor. Come visit two construction sites and see firsthand how VDC and digital tools are used in the early design phase and during the construction phase to facilitate processes, communication and collaboration on site.
PROJECTS BRICKSBO | Designed by C.F. Møller and Rambøll | Contractor: NCC AARhus i Aarhus | Designed by BIG og MOE | Contractor: MT Højgaard
TAGS: Construction and Fabrication, Planning, Model Management, Visualisation

05.COMPUTATIONAL DESIGN
SØREN JENSEN ARKITEMA EXIGO
Computational design and BIM in the early design stages presented by an engineer and an architect, and BIM from design to construction presented by a client advisor. Three different approaches to a full integrated BIM workflow. Topics; Rationalization of design, dynamic workflow through Flux, VR-glasses, BIG DATA, location based management.
TAGS: Computational Design, Simulation and analysis, Business Strategy and Leadership

06.TECNOLOGY IN BUILDINGS
NEW NORDIC NCC
As our building parts and technical systems get more and more “data driven” our new and refurbished buildings will change from being passive to very active data sources. By understanding this development, we can unleash the huge potential that data has to enable intelligent and more sustainable choices.

07. SUSTANABILITY - FULLY BOOKED
LABLAND ÅRSTIDERNE ARKITEMA
The ability to design sustainable solutions is more important than ever. Be inspired by our active approach to sustainable urban environment from urban planning and climate studies to integrated sustainable BIM simulation on buildings and lots more. Visit 3 innovative firms; Landscape architect, and Architect.
TAGS: Sustainability, Architecture / Landscape, MEP

08. BIM PROJECTS
ORBICON SLA FRIIS & MOLKTE
With a practical approach to BIM, this tour will focus on how BIM is used and bring value to our projects on a daily basis. Visit a landscape architect, engineer and architect, learn how we have chosen to structure and develop our BIM workflow and how we prioritize our individual BIM development with focus on creating value in our work.
TAGS: Architecture, Civil, MEP, Structure, Business Strategy and Leadership

Certification Exam 2
3:30 pm - 5:30 pm
Certification Exam 2
3:30 pm - 5:30 pm
 
 

Speaker Sponsor Function
6:00 pm - 8:00 pm
Speaker Sponsor Function
6:00 pm - 8:00 pm

Thu 5th
Thu 5th
Thu 5th
Welcome Tea & Coffee/Registration & Exhibition Open
7:30 am - 9:00 am
Welcome Tea & Coffee/Registration & Exhibition Open
7:30 am - 9:00 am
 
 

Chairman Introduction
9:00 am - 9:30 am
Wesley Benn
Chairman Introduction

Speaker:
Wesley Benn

Platinum Sponsor Address
9:30 am - 9:40 am
Platinum Sponsor Address

Proudly Sponsored By

Platinum Sponsor Address
9:40 am - 9:50 am
Platinum Sponsor Address
 
All Levels

Keynote Sponsor Address
9:50 am - 10:00 am
Anne Grønbjerg
Keynote Sponsor Address

Speaker:
Anne Grønbjerg, Grundfos

Proudly Sponsored By

Keynote Address: Face the Future
10:00 am - 11:00 am
Anders Hvid
Keynote Address: Face the Future
10:00 am - 11:00 am
Anders Hvid

Speaker:
Anders Hvid, DareDisrupt

Technology is changing our world. On one hand, we are challenged by disruption, automation and new players entering the marketspace. On the other hand, the opportunity for new innovation and new products or services has never been better.
How do we navigate successfully in this world? Anders Hvid will introduce the exponential paradigm, how technology and new materials are changing not only products but also the business models for the construction industry.

Morning Tea
11:00 am - 11:30 am
Morning Tea

VDC - How Technologies Enable Collaboration
11:30 am - 12:45 pm
Ole Berard
VDC - How Technologies Enable Collaboration
11:30 am - 12:45 pm
Ole Berard
Construction and Fabrication, Business Strategy and Leadership, Planning
Advanced

Speaker:
Ole Berard, MT Højgaard

This lecture will discuss the use of virtual design and construction (VDC) on the phases tender, design and execution of a new laboratory building at the Technical University of Denmark. The project contract encourages early involvement, collaboration between design and execution actors, and the use of VDC.

Key Learning Outcomes:

  1. Integrated Project Delivery in a Danish Context.
  2. An example of early involvement of contractors.
  3. Benefits of Virtual design and construction.

Session 1.2
11:30 am - 12:45 pm
Session 1.2
11:30 am - 12:45 pm
 
 

Lunch
12:45 pm - 1:45 pm
Lunch
12:45 pm - 1:45 pm

Practical BIM Collaboration in a PPP (Public-Private Partnership)-Project
1:45 pm - 3:00 pm
Søren Christensen, Vivi Nyehuus Hansen and Marianne Friis
Practical BIM Collaboration in a PPP (Public-Private Partnership)-Project
1:45 pm - 3:00 pm
Søren Christensen, Vivi Nyehuus Hansen and Marianne Friis
Construction and Fabrication, Architecture, MEP
All levels

Speaker:
Søren Christensen
Co-Speakers:
Vivi Nyehuus Hansen, Marianne Friis

This case study concerns the establishment of Denmark's first PPP hospital, involving several AEC firms navigating a complex project, by actively using BIM models for collaboration and user involvement in all phases of the building process. The lecture intends to inform of 'quick wins', successes and how to avoid pitfalls.

Key Learning Outcomes:

  1. Knowledge concerning our experiences in creating an ICT framework that supports/contributes to a better cross disciplinary model collaboration.
  2. Inspiration on how to actively use the models on-site, both for white- and blue collar workers.
  3. Knowledge about which information the models should contain in order to be useful both in the design and construction phase.

Session 1.3
1:45 pm - 3:00 pm
Session 1.3
1:45 pm - 3:00 pm
 
 

Changeover
3:00 pm - 3:15 pm
Changeover

Forge Case Studies
3:15 pm - 4:30 pm
Adam Sheather
Forge Case Studies
3:15 pm - 4:30 pm
Adam Sheather
Coding Content and Customisation, Business Strategy and Leadership, Simulation and Analysis
All Levels

Speaker:
Adam Sheather, AECOM

This class will showcase a number of developments using the forge platform. Covering model compliance, analysis, checking and simulation using Autodesk's web based forge platform and other web related tools.

Key Learning Outcomes:

  1. Forge
  2. Compliance Checking
  3. Web Platforms

Session 1.4
3:15 pm - 4:30 pm
Session 1.4
3:15 pm - 4:30 pm
 
 

Afternoon Tea
4:30 pm - 5:00 pm
Afternoon Tea

Visualisation: A Platform for Design and Collaboration
5:00 pm - 6:15 pm
Visualisation: A Platform for Design and Collaboration
5:00 pm - 6:15 pm

Session 1.5
5:00 pm - 6:15 pm
Session 1.5
5:00 pm - 6:15 pm
 
 

Generative Design with Project Fractal
5:00 pm - 6:15 pm
Anthony Hauck
Generative Design with Project Fractal
5:00 pm - 6:15 pm
Anthony Hauck
Computational Design, Architecture, Coding Content and Customisation
Intermediate

Speaker:
Anthony Hauck, Autodesk Inc.

Project Fractal is a cloud computational design solution that combines project goals, constraints, and encoded building expertise to produce design options for exploration and elaboration. Created from key Autodesk technologies, Project Fractal employs computational design generation and analysis to increase understanding of design possibilities.

Key Learning Outcomes:

  1. Learn how to extend Autodesk Dynamo with an experimental generative design service.
  2. Learn how some firms are using design option evaluation on practice.
  3. Learn how Autodesk applied generative design to its new Toronto office.

Break
6:15 pm - 6:30 pm
Break
 
 

Welcome Function
6:30 pm - 8:30 pm
Welcome Function
6:30 pm - 8:30 pm

The Welcome Function provides an opportunity to network with friends and colleagues, while enjoying a drink and canapes.

Proudly Sponsored By

Virtual Design (Simulation) & Construction for the Extension and Renovation of the Beatrix Lock System
11:30 am - 12:45 pm
Maarten van den Berg
Virtual Design (Simulation) & Construction for the Extension and Renovation of the Beatrix Lock System
11:30 am - 12:45 pm
Maarten van den Berg
Infrastructure, Model Management, Simulation and Analysis
All Levels

Speaker:
Maarten van den Berg, iNFRANEA

Model-Based Engineering offers great potential for construction projects. All technical aspects are defined as explicit data in ‘models’, not only the BIM-geometry, but also all associated meta-data. This innovative approach enables a Virtual Reality validation of the functional behaviour of this lock system. This innovative application will be demonstrated.

Key Learning Outcomes:

  1. Application Model based engineering for infrastructure design, Civil, Hardware & Software.
  2. Model Management - Level of Information - Data connection - Information Architecture.
  3. Model verification and validation.

Get started with Revit API
1:45 pm - 3:00 pm
Anders With Kaas
Get started with Revit API
1:45 pm - 3:00 pm
Anders With Kaas
Coding Content and Customisation, Architecture, General
Advanced

Speaker:
Anders With Kaas, Aarstiderne Architects

Ability to create a Revit Application from scratch. There are a lot of helpful resources online when it comes to interaction with Revit API, but how to get to a level in coding to be able to paste the code found on the internet and make it work in practice?

Key Learning Outcomes:

  1. Ability to create a Revit Application from scratch.
  2. Going from no experience in C# to make the first plug-in in Revit. We will keep it simple, you don't need to understand it all to make it work.
  3. Get started with the API and 'Boost your inner Buildingcoder".

Breaking New Ground in BIM and Asset Management for Efficient Operations and Maintenance
3:15 pm - 4:30 pm
Piu Hung YUEN and Che Kit LEE
Breaking New Ground in BIM and Asset Management for Efficient Operations and Maintenance
3:15 pm - 4:30 pm
Piu Hung YUEN and Che Kit LEE
Operations and Maintenance, MEP, Visualisation
All Levels

Speaker:
Hor Yin Chan, Electrical and Mechanical Services Department, The Government of the Hong Kong Special Administrative Region
Co-Speaker:
Che Kit LEE, Electrical and Mechanical Services Department, The Government of the Hong Kong Special Administrative Region
Piu Hung YUEN, Electrical and Mechanical Services Department, The Government of the Hong Kong Special Administrative Region

BIM has rapidly emerged in the AEC industry but its application in long building lifecycle of Operations and maintenance is little investigated. This course aims to share a novel framework and our work for enhancing buildings' Operations and maintenance by visually intuitive integration among BIM, asset management and various electronics systems.

Key Learning Outcomes:

  1. How BIM could enhance buildings' Operations and maintenance via visually intuitive integration among BIM, asset management system and various electronics systems.
  2. How BIM-AM System could facilitate responsive incident handling in critical venues to enhance building sustainability.
  3. Learn about other applications of BIM-AM System such as effective pre-planning, site preparation in alterations, additions & improvements (AA&I) works, and verification during system hand-over.

How to Row a Boat with 20 Oars Paddling in Different Directions?
5:00 pm - 6:15 pm
Doug Williams
How to Row a Boat with 20 Oars Paddling in Different Directions?
5:00 pm - 6:15 pm
Doug Williams
Business Strategy and Leadership, General
All Levels

Speaker:
Doug Williams, Leo A Daly

You may think that a Director position is just about oversight of your design tools but the reality is that a Director touches virtually every aspect of a practice; and how the heck are you going to steer that +20 oar boat where each wants to go their own directions.

Key Learning Outcomes:

  1. Understand what you need to be doing to advance your career path to become a Director of Digital Practice.
  2. Understand how deep into all aspects of a practice that a Director of Digital Practice actually penetrates and why.
  3. Understand the importance of a broad network of peers and vendors and the value that brings to your credibility and your practice.

COBie and Classification Systems in Revit
11:30 am - 12:45 pm
Jason Kunkel
COBie and Classification Systems in Revit
11:30 am - 12:45 pm
Jason Kunkel
Operations and Maintenance, General
Intermediate

Speaker:
Jason Kunkel, CADD Microsystems

Are you required to submit a COBie deliverable from Revit? Do you need to be able to apply classification data to Revit elements from UniFormat, MasterFormat, OmniClass, Uniclass, or a custom database? This session will provide a deep dive into the COBie Extension for Revit and Classification Manager for Revit.

Key Learning Outcomes:

  1. Learn which COBie data can be generated by the Revit model, and how to collect that data quickly and efficiently.
  2. Understand how to capitalise on the connectivity between COBie and major classification systems within your model.
  3. Find out how easy it is to create your own classification system and apply the data directly to Revit elements.

Build Your Own VR BIM Games
1:45 pm - 3:00 pm
Johan Hanegraaf
Build Your Own VR BIM Games
1:45 pm - 3:00 pm
Johan Hanegraaf
Visualisation, Architecture, Simulation and Analysis
Advanced

Speaker:
Johan Hanegraaf, Mecanoo

Convert your Revit models to customised interactive simulations using the Unity3D editor. This class will show you the basics and best practice to get started creating realistic interactive applications to present, analyse and simulate your Revit designs in Virtual Reality.

Key Learning Outcomes:

  1. What are the benefits of developing your own interactive apps instead of using ready built tools.
  2. What software, content and skills are needed to create interactive apps based on building information models.
  3. What are the methods and limitations of getting Revit data to an interactive game environment.

BIM BAM BOOM - Generating COBie using Solibri
3:15 pm - 4:30 pm
Kevin Fielding
BIM BAM BOOM - Generating COBie using Solibri
3:15 pm - 4:30 pm
Kevin Fielding
Architecture, Construction and Fabrication, Operations and Maintenance
Advanced

Speaker:
Kevin Fielding, Sheppard Robson

Learn how to deliver COBie data drops on BIM projects using Solibri and IFC exchanges.

Key Learning Outcomes:

  1. Understand the importance of a well organised IFC file.
  2. Learn how to manage your classifications to streamline your COBie process.
  3. Learn how to validate your data to ensure compliance.

Modelling Civil Infrastructure in Revit
5:00 pm - 6:15 pm
Nathan Love
Modelling Civil Infrastructure in Revit
5:00 pm - 6:15 pm
Nathan Love
Infrastructure
Expert

Speaker:
Nathan Love, AECOM

This class will show you various methods of modelling civil components in Revit. We will also explore different workflow options which will comprise of different software platforms in 2D and 3D format.

Key Learning Outcomes:

  1. Learn what workflows can work when converting certain data format into a revit model.
  2. Learn different options modelling methods for civil components such as rail, culverts etc.
  3. Learn how to utilise BIM Link to model complex retaining walls with data entry.

Pharma Project / Fast-track BIM
11:30 am - 12:45 pm
Daniel Maimann
Pharma Project / Fast-track BIM
11:30 am - 12:45 pm
Daniel Maimann
General, MEP, Model Management
All Levels

Speaker:
Daniel Maimann, Rambøll A/S

Working with the pharmaceutical building industry or complex MEP projects? Then this is of interest for you! The Pharma industry sets high demands to coordination, and where time schedule is staggered.

Key Learning Outcomes:

  1. Manage and scale ICT organisation.
  2. Understanding critical BIM areas and making them opportunities.
  3. Manage the link between BIM and not BIM professionals.

From OpenBIM to Facility Management, Maintenance and Operations
1:45 pm - 3:00 pm
Halvor Jensen and Håvard Bell
From OpenBIM to Facility Management, Maintenance and Operations
1:45 pm - 3:00 pm
Halvor Jensen and Håvard Bell
Operations Maintenance, Business Strategy and Leadership
All Levels

Speaker:
Halvor Jensen, NTI CADcenter AS
Co-Speakers:
Håvard Bell

Designing long complex infrastructure with Revit and Dynamo
3:15 pm - 4:30 pm
Sarai Zaballa
Designing long complex infrastructure with Revit and Dynamo
3:15 pm - 4:30 pm
Sarai Zaballa
Rock in Revit | Roll in Dynamo
5:00 pm - 6:15 pm
Jay Zallan
Rock in Revit | Roll in Dynamo
5:00 pm - 6:15 pm
Jay Zallan
Coding Content and Customisation, Architecture, General
Advanced

Speaker:
Jay Zallan, Cuningham Group

When to rock in Revit when to roll in Dynamo was well received at RTCEUR2016 and based on attendee feedback we are creating a further exploration using Revit and/or Dynamo at the best times for project efficiency.

Key Learning Outcomes:

  1. Learn to stategise project specific Revit / Dynamo workflows.
  2. Learn techniques to create Revit content, when and why.
  3. Learn techniques to create Dynamo content and drivers for Revit, when and why.

BIG data in AECO and How to Get There
11:30 am - 12:45 pm
Jay Zallan
BIG data in AECO and How to Get There
11:30 am - 12:45 pm
Jay Zallan
Business Strategy and Leadership, Architecture, Coding Content and Customisation
All Levels

Speaker:
Jay Zallan, Cuningham Group

BIG data is perhaps one of the most impactful aspects of our industry that is underutilised, if not completely non-existent. This session will explore what BIG data not only IS but how we can begin to capture it and analyse it for comprehensive and worldwide benefit.

Key Learning Outcomes:

  1. Learn what BIG data truly is.
  2. Explore usage and analysis techniques for data sets of differing complexities.
  3. Learn where we must develop and forward our firms to allow BIG data to be captured and used.

Revizto & Veidekke – Why Virtual Construction will completely change the game within the next 5 years
1:45 pm - 3:00 pm
Arman Gukasyan, Rhys Lewis, Eirik Kristensen and Preben Haugen
Revizto & Veidekke – Why Virtual Construction will completely change the game within the next 5 years
1:45 pm - 3:00 pm
Arman Gukasyan, Rhys Lewis, Eirik Kristensen and Preben Haugen
Architecture, Construction, Visualisation
All Levels

Speaker:
Arman Gukasyan, Revizto
Co-Speaker:
Rhys Lewis, Revizto, Eirik Kristensen, Veidekke, Preben Haugen, Veidekke

We will NOT be focused on all the cool things Revizto can do but the monumental impact it has when used on a BIM project. We will provide a 10,000ft holistic overview of its workflow, then dive into specific project issues and the exact workflow used in Revizto to solve it!

Key Learning Outcomes:

  1. Learn how Revizto keeps people in the software they feel most comfortable by taking email, FTP sites, advance folder structures and PDF out of the equation.
  2. How can Revizto fit into my already complex technology environment.
  3. What’s the future of augmented reality and virtual reality.

The OpenBIM Lifecycle: Achievements From the Real World
3:15 pm - 4:30 pm
Thomas Graabæk
The OpenBIM Lifecycle: Achievements From the Real World
3:15 pm - 4:30 pm
Thomas Graabæk

Speaker:
Thomas Graabæk, BIM Equity A/S

OpenBIM is a source for better collaboration between disciplines across software platforms. The key is open file formats, such as IFC, which allows AEC professionals to use a variety of BIM tools. The result is sharing of knowledge, structured information and documentation of decisions from initial sketch to operation and maintenance.

Key Learning Outcomes:

  1. Learn why OpenBIM is necessary for building owners and facility management
  2. Discover a broad range of new BIM tools
  3. Understand how BIM can add value not just for Design Development and Construction Documentation, but also for Concept Design and User Involvement.

Visualisation: A Platform for Design and Collaboration
5:00 pm - 6:15 pm
Jorge Barrero
Visualisation: A Platform for Design and Collaboration
5:00 pm - 6:15 pm
Jorge Barrero

Speaker:
Jorge Barrero, HKS

HKS examines the value of visualization through various phases of three current projects. The case studies include the NFL Los Angeles Rams stadium as well as two innovative projects in the Middle East. How is design complexity achievable and efficient between multidisciplinary international practices? For HKS the answer is amongst BIM and a larger digital toolset for communication and visualization of design ideas. The result is a common digital visualization platform that is leveraged to facilitate collaboration and productivity between project teams.

Key Learning Outcomes:

  1. Gain an understanding of digital design workflows that facilitate rapid exploration of design iterations.
  2. Lessons learned from sharing visualization models and data across a common platform.
  3. The role of BIM in the current and future design pipeline.

LAB: Site Planning in Revit
11:30 am - 12:45 pm
Peter Kompolschek
LAB: Site Planning in Revit
11:30 am - 12:45 pm
Peter Kompolschek
Infrastructure, Coding Content and Customisation, General
Expert

Speaker:
Peter Kompolschek, Kompolschek Architects

Users learn to create site plans from imported CAD Drawings, calculate characteristics for generated plots and place buildings on plots automatically.

Key Learning Outcomes:

  1. Dynamo
  2. Python
  3. Custom Nodes

LAB: Project Planning with a 4D Time Machine
1:45 pm - 4:30 pm
Sandra Damerau
LAB: Project Planning with a 4D Time Machine
1:45 pm - 4:30 pm
Sandra Damerau
Planning, Construction and Fabrication, Simulation and Analysis
Advanced

Speaker:
Sandra Damerau, Ed. Züblin AG

In this class you will plan how to build a project. You will create a schedule from a Revit model with Synchro Pro. You will create tasks, link them, apply rules, schedule and reschedule. You will produce a short movie to explain to others how you planned to build this project.

Key Learning Outcomes:

  1. Learn how to plan the construction process inside Synchro PRO creating tasks and applying logic.
  2. Learn how to transfer information from the model to the assigned tasks and use it to decide duration.
  3. Learn how to create a movie to explain your strategy.

LAB: Revit Fabrication Parts - Design to Spooling Lab
5:00 pm - 6:15 pm
Ralph Schoch
LAB: Revit Fabrication Parts - Design to Spooling Lab
5:00 pm - 6:15 pm
Ralph Schoch
MEP, Construction and Fabrication, Estimation
Intermediate

Speaker:
Ralph Schoch, Victaulic

Learn the advantages in taking a Revit design model through to fabrication spools, exemplifying the advantages of using a singular model.

Key Learning Outcomes:

  1. Convert a design model to fabrication.
  2. Efficiently make coordination and design changes.
  3. Access data for fabrication.

LAB: Urban Comfort Simulations with Simulation CFD
11:30 am - 12:45 pm
Daniel Nielsen
LAB: Urban Comfort Simulations with Simulation CFD
11:30 am - 12:45 pm
Daniel Nielsen
Simulation and Analysis, Architecture, Visualisation
All Levels

Speaker:
Daniel Nielsen, aDN

Urban CFD simulations of Revit models with Simulation CFD. Showing the advantage of using Simulation CFD with practical assignments, recommended modelling techniques, export possibilities and limitations, import techniques in Simulation CFD to gain useful results, method for interpret the results, and last how to visualise results.

Key Learning Outcomes:

  1. Simulate wind flows in an urban context for analysing urban comfort.
  2. Learn about interpretation of simulated wind flow results.
  3. Discover effective use of Simulation CFD for visualising results.

Forum: Design-A-Feature: Help Design The Future Connected Experience Between Infrastructure and Architecture!
1:45 pm - 4:30 pm
Heather Lech
Forum: Design-A-Feature: Help Design The Future Connected Experience Between Infrastructure and Architecture!
1:45 pm - 4:30 pm
Heather Lech
Infrastructure, Architecture
All Levels

Speaker:
Heather Lech, Autodesk, Inc

Autodesk wants your help designing the future connected experiences you expect from our products. We will focus on designing a seamless workflow between infrastructure and architecture. We want your expertise to create this vision! The goal is to produce design concepts that can be presented to product strategists at Autodesk.

Key Learning Outcomes:

  1. Brainstorm and conceptualise ideas with your fellow BiLT attendees to design an ideal connected experience between infrastructure and architecture.
  2. Create concept posters and visual diagrams expressing your vision which can be presented to product strategists at Autodesk (though the presentation is not part of the workshop).
  3. Learn to use human-centered design techniques to tackle complex challenges.

LAB: Creating Applications with Autodesk Forge
5:00 pm - 6:15 pm
Adam Sheather
LAB: Creating Applications with Autodesk Forge
5:00 pm - 6:15 pm
Adam Sheather
Coding Content and Customisation, Computational Design, Simulation and Analysis
Advanced

Speaker:
Adam Sheather, AECOM

Learn how to create, build and compile your own applications using forge, BIM360 and others. From accessing models, data and visualisation.

Key Learning Outcomes:

  1. Cloud Platform Services
  2. Autodesk Forge
  3. Simple Web Application

Fri 6th Oct 2017

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: Model Management
Tag: Business Strategy and Leadership
Tag: Coding, Content and Customisation
Tag: Infrastructure
Tag: Construction and Fabrication
Tag: Estimation
Tag: General
Tag: MEP
Tag: Operations and Maintenance
Tag: Planning
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
Tag: Computational Design
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
11:00 pm
11:30 pm
Fri 6th
Fri 6th
Fri 6th
Welcome Tea & Coffee/Registration Open
8:00 am - 9:00 am
Welcome Tea & Coffee/Registration Open
8:00 am - 9:00 am

Glorious Gadgets
9:00 am - 9:30 am
Glorious Gadgets
 
 

Session 2.1
9:00 am - 10:15 am
Session 2.1
9:00 am - 10:15 am
 
 

BIM Today and Tomorrow
9:30 am - 10:15 am
Pawel Piechnik, Autodesk, Inc
BIM Today and Tomorrow
9:30 am - 10:15 am
 
 

Speaker:
Pawel Piechnik, Autodesk, Inc

Autodesk presents the latest advances in Building Information Modelling. Explore how Autodesk is supporting the future of making things and connecting design, fabrication, and construction across AEC disciplines.

Key Learning Outcomes:

  1. Learn about the latest BIM technologies
  2. Discover some of the cool things brewing at Autodesk
  3. Learn how you can contribute to the future of BIM.

Morning Tea/Exhibition Open
10:15 am - 10:45 am
Morning Tea/Exhibition Open

Session 2.2
10:45 am - 12:00 pm
Session 2.2
10:45 am - 12:00 pm
 
 

RVT_QC_Monitor - A Journey from Dynamo to RevitPythonShell
10:45 am - 12:00 pm
Frederic Beaupere
RVT_QC_Monitor - A Journey from Dynamo to RevitPythonShell
10:45 am - 12:00 pm
Frederic Beaupere
General, Coding Content and Customisation, Model Management
Expert

Speaker:
Frederic Beaupere, Herzog & de Meuron

We look at the transition of our automated model QC process, from our former Dynamo setup to current RevitPythonShell version. We will explain what led to the change, talk about the involved tools, their advantages and disadvantages. Lastly we will try a live demo with the released github version.

Key Learning Outcomes:

  1. Collect Revit model data in an automated manner.
  2. Push visualisations of the collected data web pages.
  3. Dynamo / RevitPythonShell: advantages and disadvantages.

Lunch
12:00 pm - 1:00 pm
Lunch
12:00 pm - 1:00 pm

BIM Time Travel and a BIM Dream Come True
1:00 pm - 2:15 pm
Marianne Friis
BIM Time Travel and a BIM Dream Come True
1:00 pm - 2:15 pm
Marianne Friis
Model Management, Business Strategy and Leadership
All Levels

Speaker:
Marianne_Friis, Arkitema
Co-Speaker:
Morten Thomsen, AART

BIM Time Travel and a BIM dream come true A case story: Golstrup hospital 100.000sqm, starting in a distant BIM past in 2011 and today an enormous building site in full operation with BIM as a key function. You have the possibility to learn from experts and experience in 1:1.

Key Learning Outcomes:

  1. Case story; Collaboration, knowledges sharing and lesson learned from a very complex 100.000 sqm hospital building planned and build from 2011 to 2020.
  2. BIM strategy, how to plan for the unknown BIM journey. Tender with quantities, division of the BIM model, 3000 sheets, 6000 rooms, tender with quantities - lots to do.
  3. Experiences from the building site with BIM as the key point, interview with the client presented by the project manager.

Session 2.3
1:00 pm - 2:15 pm
Session 2.3
1:00 pm - 2:15 pm
 
 

Changeover
2:15 pm - 2:30 pm
Changeover

Unicorns and Rainbows: A Journey Into Autodesk's Project Delivery Investments
2:30 pm - 3:45 pm
Kyle Bernhardt
Unicorns and Rainbows: A Journey Into Autodesk's Project Delivery Investments
2:30 pm - 3:45 pm
Kyle Bernhardt
Business Strategy and Leadership, Architecture, Model Management
Advanced

Speaker:
Kyle Bernhardt, Autodesk

Project Delivery solutions are the connective tissue between tools on a project, and Autodesk is making major investments in this area. Let's take a journey through the bleeding edge of that investment with Kyle Bernhardt, the Product Lead of those investments.

Key Learning Outcomes:

  1. Understand Autodesk's Project Delivery strategy
  2. Understand what tools are available now
  3. Understand what tools might be available in the near future

Session 2.4
2:30 pm - 3:45 pm
Session 2.4
2:30 pm - 3:45 pm
 
 

Afternoon Tea
3:45 pm - 4:15 pm
Afternoon Tea

The Long Game: Maintaining Complex Interoperable Workflows Through Multiple Phases and Teams
4:15 pm - 5:30 pm
Brian Ringley
The Long Game: Maintaining Complex Interoperable Workflows Through Multiple Phases and Teams
4:15 pm - 5:30 pm
Brian Ringley
Architecture, Business Strategy and Leadership, Model Management
Advanced

Speaker:
Brian Ringley, WeWork

Maintaining workflow interoperability is difficult - ensuring it's maintained from concept to construction is even tougher. This industry talk will feature project case studies that demonstrate the bleeding edge technology and communication protocol required to synchronously design and document complex projects from start to finish.

Key Learning Outcomes:

  1. Appreciate how computational methods and tools such as Dynamo and Grasshopper enhance the existing parametric capabilities of Revit by creating situational intelligence and element interdependence in the model.
  2. Understand data interoperability as a strategic decision made at project establishment and coordinated throughout its lifecycle, rather than as a series of situational responses, with the aid of Flux.
  3. See how successful workflows go beyond BIM methodology into cultural issues, where continuous technical process improvements are made in tandem with new methods of team collaboration and social behavior.

Session 2.5
4:15 pm - 5:30 pm
Session 2.5
4:15 pm - 5:30 pm
 
 

Break
5:30 pm - 6:45 pm
Break
5:30 pm - 6:45 pm

Friday Evening Function
7:00 pm - 11:00 pm
Friday Evening Function
7:00 pm - 11:00 pm

Join us at the Moesgaard Museum, which is not only a architectural marvel – enjoy time around the impressive exhibits.

Proudly Sponsored by

Revit MEP and MagiCAD is a Powerful Solution
10:45 am - 12:00 pm
Emil Edvardsen
Revit MEP and MagiCAD is a Powerful Solution
10:45 am - 12:00 pm
Emil Edvardsen
MEP, Simulation and Analysis
Expert

Speaker:
Emil Edvardsen, INGENIØR'NE A/S

This class aims to teach participants about using Revit MEP and MagiCAD to draft and calculate complicated duct and piping systems. It will cover how to select and use real product content from the online database and delete product information if needed, calculate duct and pipe flow to ensure projects requirements and local standards. Pipe flow calculations will cover both hydronic and domestic systems. The class will also show you how to calculate sound level in Spaces from the duct system. This session will teach you to use a BIM model with a view from an HVAC engineer based on a real project!

Key Learning Outcomes:

  1. Learn how to model complicated duct and pipe work with MagiCAD on top of Revit MEP.
  2. Learn how to ensure that all sound requirements are met with MagiCAD.
  3. Learn how to calculate various systems with MagiCAD to ensure a real BIM model.

Use the Force: The Value of Creating Your Own Revit Template for Structural Engineers
1:00 pm - 2:15 pm
Gustav Blom
Use the Force: The Value of Creating Your Own Revit Template for Structural Engineers
1:00 pm - 2:15 pm
Gustav Blom
Coding Content and Customisation, Construction and Fabrication, Structure
All Levels

Speaker:
Gustav Blom, Ramboll

This presentation focuses on the value of having a highly customised template in structural modelling, and using own project experience when developing said template. With a template built on the core BIM goals of your business along with specific custom-built add-ins, significant improvements in productivity and accuracy may be achieved.

Key Learning Outcomes:

  1. Value of customised templates.
  2. Revit Structure workflow optimisation.
  3. Defining BIM uses.

Planting Seeds - Creative Use of the Planting Category in Revit
2:30 pm - 3:45 pm
Andrew Milburn
Planting Seeds - Creative Use of the Planting Category in Revit
2:30 pm - 3:45 pm
Andrew Milburn
Architecture, General, Simulation and Analysis
Advanced

Speaker:
Andrew Milburn, GAJ Architects

We will review the capabilities and limitations of the Planting category in Revit, examine several custom families, and explore some non-standard uses, including the scaling hack. The emphasis will be on live demonstrations and all the families shown will be available for download.

Key Learning Outcomes:

  1. Gain a deeper understanding of the capabilities and limitations of the Planting category in Revit.
  2. Learn to customise RPC families to be more responsive, consistent and intuitive in use.
  3. Become familiar with several non-standard uses of the Planting category .

The Future of Now: 4D Visualisation with Mixed Reality
4:15 pm - 5:30 pm
Greg Demchak
The Future of Now: 4D Visualisation with Mixed Reality
4:15 pm - 5:30 pm
Greg Demchak
Visualisation, Simulation and Analysis
All Levels

Speaker:
Greg Demchak, Synchro Software

Learn how to generate 4D visualisations of construction Operations and for use with mixed reality devices.

Key Learning Outcomes:

  1. Learn about and experience Mixed Reality
  2. Learn how to get started with development for Mixed Reality
  3. Expereince your first hologram of 4D construction sequencing

Rethinking Organisational Change
10:45 am - 12:00 pm
Martin Romby Hauge
Rethinking Organisational Change
10:45 am - 12:00 pm
Martin Romby Hauge
Business Strategy and Leadership, Architecture, General
All Levels

Speaker:
Martin Romby Hauge, LINK Arkitektur Denmark

It is a fact that the introduction of BIM in the AEC industry, calls for a change in culture, mindset, methods and process. The presentation will showcase how the 8-Step process of 'Leading Change' (Dr. John Paul Kotter) was used in the BIM implementation in a large architectural organisation.

Key Learning Outcomes:

  1. Learn how to drive a successful change in your organisation.
  2. Learn how to convert theory into practical use and methods.
  3. Learn why a strategic approach is crucial in implementation of BIM.

How to do Revit to IFC Properly!
1:00 pm - 2:15 pm
Kevin Fielding
How to do Revit to IFC Properly!
1:00 pm - 2:15 pm
Kevin Fielding
Architecture, Coding Content and Customisation, Operations and Maintenance
Advanced

Speaker:
Kevin Fielding, Sheppard Robson

IFC interoperability is key Open BIM; understand how to use the IFC Exporter Plugin to export IFC from Revit, and all the hidden features.

Key Learning Outcomes:

  1. Control where your data is exported within the IFC schema.
  2. Understand the importance of interoperabilty.
  3. Understand the settings of the Alternative IFC Exporter, and how they impact your output.

Modelling Bridges and Special Constructions with Revit and Dynamo Reloaded
2:30 pm - 3:45 pm
Oliver Langwich
Modelling Bridges and Special Constructions with Revit and Dynamo Reloaded
2:30 pm - 3:45 pm
Oliver Langwich
Infrastructure, Structure
Advanced

Speaker:
Oliver Langwich, Contelos

Get a general survey about bridge requirements regarding 3D objects like superstructures, abutments. At least get to know two different workflows / modelling concepts for bridge design. Get a deeper look into Revit's own modelling tools for advanced modelling and how to use Dynamo for it too.

Key Learning Outcomes:

  1. Get a general survey about bridge requirements regarding 3D objects like superstructures, abutments etc.
  2. Get to know two different workflows / modeling concepts for bridge design.
  3. Get a deeper look into Revit's own modeling tools for advanced modeling and how to use Dynamo as a helper for modeling and documentation tasks.

Joining BIM, CAD and GIS
4:15 pm - 5:30 pm
Morten Sørensen
Joining BIM, CAD and GIS
4:15 pm - 5:30 pm
Morten Sørensen
Planning, Business Strategy and Leadership, Operations and Maintenance
All Levels

Speaker:
Morten Sørensen, NIRAS

From a starting point in real world cases we will take you on a virtual journey from CAD paper drawings to a dynamic, flexible GIS solution and how GIS can become a tool in the BIM toolbox.

Key Learning Outcomes:

  1. Learn how GIS and BIM/CAD can work together.
  2. Learn the main differences between GIS and CAD.
  3. Generally knowledge of GIS from a BIM/CAD perspective.

Enhancing your Structural Detailing Skills
10:45 am - 12:00 pm
Nathan Love
Enhancing your Structural Detailing Skills
10:45 am - 12:00 pm
Nathan Love
Structure, Model Management
Advanced

Speaker:
Nathan Love, AECOM

Learn some ways to detail your structural revit model depending on the amount of data / detail that is required for your project. This class will demonstrate some different ways to model, detail and create family content no matter what your experience level is.

Key Learning Outcomes:

  1. Learn some modelling methods for concrete and steel to increase efficiency so you can avoid bad habits.
  2. Learn how to create hybrid families and annotation families for quantity take off purposes.
  3. Discover the pros and cons of the new Steel Connection Centre so you can decide if it is really worth your while.

Revit MEP Pointcloud Workflow
1:00 pm - 2:15 pm
Jonas Hyllested Christensen
Revit MEP Pointcloud Workflow
1:00 pm - 2:15 pm
Jonas Hyllested Christensen
MEP, Planning, Visualisation
Advanced

Speaker:
Jonas Hyllested Christensen, Rambøll A/S

Tired of going through existing building documentation paper trail for upcoming renovation project? Never quite sure if documentation information has been updated to as built? Using laser scanning for built documentation and integrating point cloud(s) in BIM workflow can minimise risks and lack of information throughout the design phases.

Key Learning Outcomes:

  1. Learning to use point cloud, Revit and Navisworks workflow and how to set it up.
  2. Understanding the value of point clouds in renovation project.
  3. Using point clouds for documentation purpose.

TASmanianDevil BIM How to Use Dynamo to Connect Revit with TAS simulation Tool by Michal Dengusiak
2:30 pm - 3:45 pm
Michal Dengusiak
TASmanianDevil BIM How to Use Dynamo to Connect Revit with TAS simulation Tool by Michal Dengusiak
2:30 pm - 3:45 pm
Michal Dengusiak
Simulation and Analysis, Architecture, MEP
Advanced

Speaker:
Michal Dengusiak, BuroHappold Engineering

TASmanianDevil BIM is a free and open source plugin for Dynamo to help engineers and designers use the simulation tool TAS to perform thermal, energy and daylight simulations.

Key Learning Outcomes:

  1. Introduction to TASmanianDevil BIM.
  2. How to install TASmanainDevil BIM within Dynamo.
  3. How to control simulation tool via TASmanianDevil BIM.

BIM for Digital Fabrication: Three Projects Demonstrating the Implication of Digital Fabrication, When Rolled Out in Large Scale
4:15 pm - 5:30 pm
Jacob Drachmann
BIM for Digital Fabrication: Three Projects Demonstrating the Implication of Digital Fabrication, When Rolled Out in Large Scale
4:15 pm - 5:30 pm
Jacob Drachmann
Construction and Fabrication, Architecture, Computational Design
All Levels

Speaker:
Jacob Drachmann, CN3

We will show how we have designed for Digital Fabrication in three large scale projects – a complex façade renovation of an old grain silo, a geometrically challenging concrete structure designed by Olafur Eliasson and finally NS20 – a large infrastructure project in Stockholm.

Key Learning Outcomes:

  1. Learn how LOD400+ Digital Fabrication BIM models has been used on three complex projects.
  2. Get inspired from Complex Geometry and Computational Design used in real-life construction projects.
  3. BIM in infrastructure. See how BIM can improve productivity, reduce material waste and manual labour on site.

Any Software (almost) on any Device: A Case Study of Virtualization with BIM: HVE ConneXions & Beck Group
10:45 am - 12:00 pm
Aaron Maller
Any Software (almost) on any Device: A Case Study of Virtualization with BIM: HVE ConneXions & Beck Group
10:45 am - 12:00 pm
Aaron Maller
 
 

Speaker:
Aaron Maller, Parallax Team

This lecture and demonstration will showcase the Beck Group’s move to HVE ConneXions Virtualised desktops, for running BIM Platforms. An overview of compute virtualisation and how you can leverage virtualisation for testing and development at home/work.

Key Learning Outcomes:

  1. Understand the physical requirements for implementing VDI for BIM Workstations.
  2. Learn the Pros and Cons of different methods of virtualisation (XenAPP, Virtual Workstations Client, Remote Desktop, Fixed Desktops or Pooled Desktops, resource scaling).
  3. Understand the ROI (real or imagined!?) of converting your company to VDI from Workstation class machines.

The Singapore BIM Mandate: Context & Consequences
1:00 pm - 2:15 pm
Phil Lazarus
The Singapore BIM Mandate: Context & Consequences
1:00 pm - 2:15 pm
Phil Lazarus
Model Management, Business Strategy and Leadership

Speaker:
Phil Lazarus, Lendlease

Singapore has taken bold steps to advance productivity in the built environment by driving industry adoption of 3D technology. In this session, Phil Lazarus (a Digital Specialist working in Singapore since 2006), will place the country’s “BIM Mandate” in context while discussing it’s impact from a practitioner’s perspective.

Yes We Can...
2:30 pm - 3:45 pm
Martijn de Riet and Mark Wieringa
Yes We Can...
2:30 pm - 3:45 pm
Martijn de Riet and Mark Wieringa
 
 

Speaker:
Martijn de Riet, BIMforce
Co-Speaker:
Mark Wieringa, BIMforce

In 1994 buildingSMART promised "The End of Babel" in a very well-known documentary explaining how IFC would solve interoperability problems. Almost 25 years later, time has come to finally fulfil that promise. This class will demonstrate that you can have an IFC based workflow in your native modelling tools without limitations.

Delivering as-built Information Model Through Efficient Data Collection:
4:15 pm - 5:30 pm
Harald Onarheim
Delivering as-built Information Model Through Efficient Data Collection:
4:15 pm - 5:30 pm
Harald Onarheim
Model Management, Operations and Maintenance
Intermediate

Speaker:
Harald Onarheim , coBuilder AS

The lecture will address common issues with as-built data collection, validation and delivery on projects. It will give insight on the increasingly complex data requirements imposed by both market and legislation and how to efficiently use present technologies to comply with them. Better Information Management solutions will be discussed and how they can help transform data collection practices, allowing contractors and subcontractors to deliver accurate information on handover.

Key Learning Outcomes:

  1. Describe best practices for collecting accurate manufacturer‘s data.
  2. Recognise the various complications related to national, international product data requirements.
  3. • Enhance the collaboration between supply chain members within a centralised data management system.

LAB: The Future of Now: 4D Visualisation with Mixed Reality
10:45 am - 12:00 pm
Greg Demchak
LAB: The Future of Now: 4D Visualisation with Mixed Reality
10:45 am - 12:00 pm
Greg Demchak
Simulation and Analysis, Computational Design, Visualisation
Advanced

Speaker:
Greg Demchak, Synchro Software

Learn how to generate 4D visualisations of construction Operations and for use with mixed reality devices.

Key Learning Outcomes:

  1. Learn about and experience Mixed Reality
  2. Learn how to get started with development for Mixed Reality
  3. Expereince your first hologram of 4D construction sequencing

LAB: Machine Learning for Everyone: Practical Applications using Dynamo
1:00 pm - 2:15 pm
Radu Gidei
LAB: Machine Learning for Everyone: Practical Applications using Dynamo
1:00 pm - 2:15 pm
Radu Gidei
Simulation and Analysis, Architecture, Coding Content and Customisation
Advanced

Speaker:
Radu Gidei, Grimshaw

Learn what machine learning is all about and discover how we applied it to practical everyday BIM challenges on UK projects & learn to do it yourself with Dynamo.

Key Learning Outcomes:

  1. Discover what Machine Learning is and how it can be used on real-world projects.
  2. Formulate questions & assemble datasets suitable for statistical analysis.
  3. Use Dynamo to run Machine Learning algorithms on typical BIM datasets, predict outcomes & visualise results.

LAB: Supercharge Open BIM: Dynamo for IFC and BCF
2:30 pm - 3:45 pm
Alejandro Mata
LAB: Supercharge Open BIM: Dynamo for IFC and BCF
2:30 pm - 3:45 pm
Alejandro Mata
Computational Design, General, Operations and Maintenance
Advanced

Speaker:
Alejandro Mata, MOE A/S

This lab will show and practice how to perform data analytics of IFC models using Dynamo and communication of these results using BCF. Example of several workflows will be shown applied in real project cases.

Key Learning Outcomes:

  1. How to analyse property sets of IFC models by using Dynamo.
  2. How to perform several project case workflows using IFC combined with Dynamo.
  3. How to enhance BCF performance by using Dynamo.

LAB: New Multi-Story Stair and Railing Features
4:15 pm - 5:30 pm
Dan Stine
LAB: New Multi-Story Stair and Railing Features
4:15 pm - 5:30 pm
Dan Stine
Architecture, Construction and Fabrication, General
Intermediate

Speaker:
Dan Stine, LHB

The Multi-Story stair tool has been completely revamped for Revit 2018. This lab will cover what has changed, how old MS stairs are upgraded as well as some of the limitations. Additionally, there are a few new railing features we will look at.

Key Learning Outcomes:

  1. Understand how old multi-story stairs are upgraded.
  2. Know how to define which levels are part of the multi-story stair system.
  3. Learn about some changes to railings in this version of Revit.

LAB: The Use of Windows Forms in Revit Scripts
10:45 am - 12:00 pm
Peter Kompolschek
LAB: The Use of Windows Forms in Revit Scripts
10:45 am - 12:00 pm
Peter Kompolschek
Coding Content and Customisation
Expert

Speaker:
Peter Kompolschek, Kompolschek Architects

In this class, participants will understand the concept of Revit macros and how to integrate Windows Forms in such macro.s

Key Learning Outcomes:

  1. Revit Macros
  2. Windows Forms
  3. Python

LAB: Building Games - Using Unity for Virtual Reality and Augmented Reality
1:00 pm - 3:45 pm
Paul Vesey
LAB: Building Games - Using Unity for Virtual Reality and Augmented Reality
1:00 pm - 3:45 pm
Paul Vesey
Visualisation, General
Intermediate

Speaker:
Paul Vesey, Limerick Institute of Technology

Creating compelling Virtual Reality (VR) and Augmented Reality (AR) experiences has never been easier. Learn how to use Unity with Google VR and Vuforia to create VR and AR applications for Android devices. Change your view of Reality.

Key Learning Outcomes:

  1. Learn how to create an Android Virtual Reality application using the Unity Game engine and Google VR.
  2. Learn how to create an Android Augmented Reality application using the Unity Game engine and Vuforia.
  3. Discover how Reality applications can change the nature of design, construction and building management.

LAB: MEP Engineers on the Way: How to Improve MEP Construction Modelling with Dynamo
4:15 pm - 5:30 pm
Cesare Caoduro
LAB: MEP Engineers on the Way: How to Improve MEP Construction Modelling with Dynamo
4:15 pm - 5:30 pm
Cesare Caoduro
Computational Design, Construction and Fabrication, MEP
Intermediate

Speaker:
Cesare Caoduro, COWI

In this class we'll understand how to use Dynamo to perform day by day activities from an M&E contractor point of view. From simple parameters mirroring, to more advanced techniques, including the use of Python scripting. Real world applications in one of the most important rail project in middle east

Key Learning Outcomes:

  1. Use automations in Revit to create reservations for MEP services
  2. Learn how to think like a programmer without any programming experience
  3. Use Dynamo to help avoid repetitive tasks

Sat 7th Oct 2017

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: Model Management
Tag: Business Strategy and Leadership
Tag: Coding, Content and Customisation
Tag: Infrastructure
Tag: Construction and Fabrication
Tag: Estimation
Tag: General
Tag: MEP
Tag: Operations and Maintenance
Tag: Planning
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
Tag: Computational Design
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
11:00 pm
11:30 pm
Sat 7th
Sat 7th
Sat 7th
Welcome Tea & Coffee
8:30 am - 9:00 am
Welcome Tea & Coffee

Session 3.1
9:00 am - 10:15 am
Session 3.1
9:00 am - 10:15 am
 
 

Worst Fear or Radical Opportunity: The Automation of Architecture
9:00 am - 10:15 am
Brian Ringley
Worst Fear or Radical Opportunity: The Automation of Architecture
9:00 am - 10:15 am
Brian Ringley
Architecture, Business Strategy and Leadership, Coding Content and Customisation
All Levels

Speaker:
Brian Ringley, WeWork

The automation of architecture represents the end of the industry as we know it and the beginning of radical new possibilities for design. We take a look at the realities of automation and their impact on near-future practice through industry examples and the automation of the Revit Sample Project.

Key Learning Outcomes:

  1. Learn how bleeding edge architecture practices are using design computation to automate complex processes and what impact automation has on project delivery.
  2. Understand where the current and near-future BIM ecosystem (Revit, Dynamo, Forge, Quantum, etc.) stands in terms of fostering design automation.
  3. Critically differentiate the replacement of designers by automation from hybrid models of computer-human agency.

Morning Tea/Exhibition Open
10:15 am - 10:45 am
Morning Tea/Exhibition Open

The Undeniable Benefits of Parametrics: A Stadium-Design Case Study
10:45 am - 12:00 pm
Shawnee Finlayson
The Undeniable Benefits of Parametrics: A Stadium-Design Case Study
10:45 am - 12:00 pm
Shawnee Finlayson
Structure, Computational Design, General
Intermediate

Speaker:
Shawnee Finlayson, Arup

This talk will demonstrate how a basic understanding of Dynamo can add massive value to a design team - saving over 200 documentation hours during the concept design phase. We will explore simple workflows using Dynamo and Grasshopper that helped us design, coordinate and document a new stadium in Sydney.

Key Learning Outcomes:

  1. Learn how to increase design team efficiencies through simple parametric knowledge
  2. Learn new workflows and discover tools to improve concept phase coordination
  3. Learn from a demonstration of reduced project hours and costs

Session 3.2
10:45 am - 12:00 pm
Session 3.2
10:45 am - 12:00 pm
 
 

Lunch
12:00 pm - 1:00 pm
Lunch
12:00 pm - 1:00 pm

MEP Construction Projects with Graphical Programing (Dynamo)
1:00 pm - 2:15 pm
Umit Balaban
MEP Construction Projects with Graphical Programing (Dynamo)
1:00 pm - 2:15 pm
Umit Balaban
MEP, Construction and Fabrication
Advanced

Speaker:
Umit Balaban, Anel Grup

This is a good case study on how to develop MEP design projects to Construction projects. Graphical programming help MEP construction models.

Key Learning Outcomes:

  1. Learn how to Dynamo and API developer teams help in MEP construction projects.
  2. Learn how to develop design model to construction model.
  3. Learn how to connect field and office. Sharing documentation.

Session 3.3
1:00 pm - 2:15 pm
Session 3.3
1:00 pm - 2:15 pm
 
 

Changeover
2:15 pm - 2:30 pm
Changeover
 
 

Revit Journal Files They Aren't Just for Autodesk
2:30 pm - 3:45 pm
Brian Mackey
Revit Journal Files They Aren't Just for Autodesk
2:30 pm - 3:45 pm
Brian Mackey
General, Architecture, Structure
All Levels

Speaker:
Brian Mackey, BD Mackey Consulting

This session will discuss how to use journal files to help perform repetitive tasks. This session will uncover the location of journal files, how to read portions of the journal files that are pertinent to you, and then how to extract the task needed to perform repetitive tasks.

Key Learning Outcomes:

  1. Understand what Journal files are.
  2. How to create Journal files for repetitive tasks.
  3. Understand that Journal files can be Revit Scripts.

Session 3.4
2:30 pm - 3:45 pm
Session 3.4
2:30 pm - 3:45 pm
 
 

Afternoon Tea
3:45 pm - 4:00 pm
Afternoon Tea

Closing Plenary
4:00 pm - 5:30 pm
Closing Plenary
4:00 pm - 5:30 pm
 
 

Changeover
5:45 pm - 6:00 pm
Changeover
 
 

Speaker Debrief
6:00 pm - 6:30 pm
Speaker Debrief
 
 

Break
6:45 pm - 7:15 pm
Break
 
 

Gala Dinner
7:00 pm - 12:00 am
Gala Dinner
Gala Dinner
7:00 pm - 12:00 am
Gala Dinner

Proudly Sponsored by

How Dynamo Can Help Revit With Its Topographical Issues
9:00 am - 10:15 am
Jostein Berger Olsen
How Dynamo Can Help Revit With Its Topographical Issues
9:00 am - 10:15 am
Jostein Berger Olsen
Infrastructure, Architecture, Coding Content and Customisation
Intermediate

Speaker:
Jostein Berger Olsen, Sweco

How can Dynamo expand the possibilities of toposurface handling and analysis in Revit.

Key Learning Outcomes:

  1. How to extract topographies from Revit and its inherent information with Dynamo.
  2. Analyse different metrics of the topography in Dynamo and Revit.
  3. Document Revit topographies in ways you didn't know you could.

MEP Data Analytics: Enhance your MEP Design and Decision Taking
10:45 am - 12:00 pm
Alejandro Mata
MEP Data Analytics: Enhance your MEP Design and Decision Taking
10:45 am - 12:00 pm
Alejandro Mata
MEP, Computational Design, General
Expert

Speaker:
Alejandro Mata, MOE A/S

This presentation will show how to perform data analytics for MEP design by using Autodesk Revit MEP connected with Dynamo, Microsoft Power BI and Flux. This class will show best practices to visualise MEP data for optimising MEP design and enhancing project quality control and decision taking.

Key Learning Outcomes:

  1. Learn different workflows for connecting MEP data between Autodesk Revit.
  2. Learn the best practices for visualising MEP data.
  3. Learn how to utilised MEP data for optimising MEP design and data driven decision making.

Structural Refurbishment - Parker Tower in London
1:00 pm - 2:15 pm
Damien Lefranc
Structural Refurbishment - Parker Tower in London
1:00 pm - 2:15 pm
Damien Lefranc
General, Construction and Fabrication, Structure
All Levels

Speaker:
Damien Lefranc, Groupe Legendre

This presentation will explain in detail a refurbishment project in Covent Garden, London. With various software technologies (Tekla, SimpleBIM, Dynamo, MSProject, Naviswork, BIM Sync, Revit), this tower will be converted of this outdated office building into apartments. Several difficulties were considered as facade refurbishment, level phasing and site installation.

Key Learning Outcomes:

  1. Optimisation of equipment for columns refurbishment.
  2. Learn how to use cloud services to share data with IFC and BCF format.
  3. Learn to use Navisworks to create 4D simulation.

Optimising MEP Workflow Through Dynamo
2:30 pm - 3:45 pm
Tord Jacobsen
Optimising MEP Workflow Through Dynamo
2:30 pm - 3:45 pm
Tord Jacobsen
MEP, Coding Content and Customisation, Model Management
Intermediate

Speaker:
Tord Jacobsen, Rambøll

The focus of this presentation is using Dynamo for Revit to integrate Excel calculations into model workflows. Presenting examples, the presentation will show how to streamline your calculation and modelling workflow, increasing productivity and improving the quality of your final product.

Key Learning Outcomes:

  1. Learn how to utilise Dynamo from an MEP perspective.
  2. How to integrate calculations into a Revit model.
  3. How to improve and automate your workflow.

Let’s Rethink How We Do MEP Routings in Revit
9:00 am - 10:15 am
Michael Porskær and Ralph Schoch
Let’s Rethink How We Do MEP Routings in Revit
9:00 am - 10:15 am
Michael Porskær and Ralph Schoch
MEP, Coding, Content and Customisation, Computational Design
All Levels

Speaker:
Michael Porskær, Orbicon A/S
Speaker:
Ralph Schoch, Victaulic

Does Revit truly support MEP routing in early project phases? We will discuss a concept called “Generic Routing” making designs flexible while continuing to evolve. When the design becomes finalized then using “Smart Families” to bring your design to life.

Key Learning Outcomes:

  1. Learn how you can use BIM for MEP routings in the early project phases, without detailing too much and what value it will bring to the next project phases.
  2. Learn how MEP routings can get well coordinated, already from early in the project, between both architect and other MEP disciplines.
  3. Learn how you can use data in the model to make better decisions in the early project phases.

From Idea to 3D Printed Reality: A 3D Printed Building and Explorations of Additive Manufacturing in Architecture Design
10:45 am - 12:00 pm
Jorge Barrero
From Idea to 3D Printed Reality: A 3D Printed Building and Explorations of Additive Manufacturing in Architecture Design
10:45 am - 12:00 pm
Jorge Barrero
Architecture, Construction and Fabrication, Visualisation
Expert

Speaker:
Jorge Barrero, HKS

Based on 3D printing technology from WinSun Global, insight behind the design process and digital technology used to create the first 3D printed building in Dubai will be presented. In addition, a glimpse into HKS LINE and process innovation.

Key Learning Outcomes:

  1. Learn about the pros and cons of 3D printing in the construction industry.
  2. Learn about the economic and environmental benfits of 3D printing architecture.
  3. Learn about current challenges that need to make 3D printing buildings a standard practice.

5D Location-Based Project and Risk Management of Complex Public Hospital Projects
1:00 pm - 2:15 pm
Simon F. Ramsløv
5D Location-Based Project and Risk Management of Complex Public Hospital Projects
1:00 pm - 2:15 pm
Simon F. Ramsløv
Simulation and Analysis, Estimation, Planning
All Levels

Speaker:
Simon F. Ramsløv

In complex projects, the risk management processes are critical for the owner to keep track of the cost and schedule of the project. This session demonstrates the integrated use of Revit, Dynamo and Vico Office for quality management, location-based scheduling and 5D cost estimation in a large hospital project.

Key Learning Outcomes:

  1. Understand the importance of a constructible building model.
  2. Join us to get a deeper knowledge of location-based scheduling.
  3. Learn how 5D and big data is used to reduce the building owners risk in complex projects.

Documenting Stupendous Erections ' Optimising Model Structures for High Rise Projects
2:30 pm - 3:45 pm
Richard Kuppusamy
Documenting Stupendous Erections ' Optimising Model Structures for High Rise Projects
2:30 pm - 3:45 pm
Richard Kuppusamy
Model Management, Architecture, Coding Content and Customisation
Intermediate

Speaker:
Richard Kuppusamy, Lendlease

Whether it's documenting super tall buildings, mixed-use developments, projects with multiple stakeholders, or the demand to make rapid design changes to the same deadline; we find our BIM creaking at the seams. This class will look at the pros and cons of federated modelling and how to organise your BIM.

Key Learning Outcomes:

  1. Know how to organise and breakdown your BIM into logical components to suit your workflow.
  2. Understand the pros and cons of federated BIM and documentation.
  3. Manage quality and consistency in a multiple file BIM.

Big Brother Does Our Model QC
9:00 am - 10:15 am
Robert Manna and Joel Martineau
Big Brother Does Our Model QC
9:00 am - 10:15 am
Robert Manna and Joel Martineau
Model Management, Business Strategy and Leadership, Coding Content and Customisation
Intermediate

Speaker:
Robert Manna, Stantec
Co-Speaker:
Joel Martineau, Stantec

A look at using big data to create a culture of proactive model health at the team level, by empowering teams with trend information on their models. This allows teams to know when they are headed for problems and alerts them that they should take corrective action.

Key Learning Outcomes:

  1. Understand the advantages of leveraging big data for Model QC.
  2. Learn an approach to creating a proactive culture by watching trends of critical model indicators.
  3. Know how to encourage team ownership of model health.

Aarhus University Hospital - Confidence and Courage to Innovate
10:45 am - 12:00 pm
Søren Sti Andersen
Aarhus University Hospital - Confidence and Courage to Innovate
10:45 am - 12:00 pm
Søren Sti Andersen
Business Strategy and Leadership, General, Planning
All Levels

Speaker:
Søren Sti Andersen, NIRAS
Peter Hyttel, Rådgivegruppen DNU
Stig Brinck, NIRAS

A case study of the largest hospital construction project in Danish history. A project with a high BIM ambition of becoming an innovative landmark. Our presentation will reveal secret ingredients and tell the stories about the importance of trust, commitment, courage and confidence between Client and consultants.

Key Learning Outcomes:

  1. Learnings from a BIM landmark project: Process innovation.
  2. Learnings from a BIM landmark project: Product innovation.
  3. Learnings from a BIM landmark project: Successes and challenges.

BIMonRAILS
1:00 pm - 2:15 pm
Thomas Angeltveit
BIMonRAILS
1:00 pm - 2:15 pm
Thomas Angeltveit
Infrastructure, Structure, Visualisation
All Levels

Speaker:
Thomas Angeltveit, Norconsult AS

Railroad design has been patiently waiting in line of innovation. Norconsult got bored waiting and decided to innovate the BIM out of it. Don't be the one jumping on the last train, jump on the first one with us. Next stop... BIMonRAILS.

Key Learning Outcomes:

  1. How to push stagnated industry further and make that beneficial for all parties involved.
  2. Learn how to gain value of live colaboration in model environment.
  3. How to utilise gaming engines and create interactive experience that brings value "to the table".

See My Point (Cloud)? My Experience Laser Scanning a Historical Building and Making Use of the Data
2:30 pm - 3:45 pm
Conor Shaw
See My Point (Cloud)? My Experience Laser Scanning a Historical Building and Making Use of the Data
2:30 pm - 3:45 pm
Conor Shaw
General, Model Management, Planning
Intermediate

Speaker:
Conor Shaw, Shaw Architectural Solutions

This class will showcase a 'CIBSE Building Simulation Group' award-winning Master Thesis project which used a historic building to put the usefulness of point cloud data to the test. Attendees will witness the practical application of a number of emerging technologies and share in the profound findings of the research.

Key Learning Outcomes:

  1. Familiarise with the context of data capture.
  2. Gain a practical understanding of scan-to-BIM technology, its best applications and limitations.
  3. Share in the findings of the research, namely the identification of areas for further development.

BIM Common Ground in Different Scales - NetZero Houses, LEED Platinum Building and a Green Campus
9:00 am - 10:15 am
Joseph Cory
BIM Common Ground in Different Scales - NetZero Houses, LEED Platinum Building and a Green Campus
9:00 am - 10:15 am
Joseph Cory
Architecture, Simulation and Analysis
All Levels

Speaker:
Joseph Cory, Geotectura

This article will show several case studies by Geotectura with different scale that were designed with BIM methods in order to achieve best sustainable aspects. The projects are different from each other by many parameters such as scale, budget, program but they share the same sustainable values and BIM approach.

Key Learning Outcomes:

  1. Adopting in-house capabilities using BIM for architectural offices in order to achieve sustainable design.
  2. Case studies in different scale that use BIM from the conceptual phase till the realisation of the project.
  3. AR and sustainable simulations integration with BIM workflow.

IFC, Abuse and Use as a Sharing Format
10:45 am - 12:00 pm
Ewoud Ruifrok
IFC, Abuse and Use as a Sharing Format
10:45 am - 12:00 pm
Ewoud Ruifrok
Computational Design, Model Management, Simulation and Analysis
Advanced

Speaker:
Ewoud Ruifrok, Arup

IFC is not only for clash detection. It's really useful for sharing models and data. This course will showcase how IFC can be utilised in your multidisciplinary design team workflows by setting your own basic model MVD's.

Key Learning Outcomes:

  1. When to consider IFC as a transfer format.
  2. Learn how to setup a simple project specific MVD to tranfer specific data.
  3. Improve your abilty to identify use cases for IFC exchange.

Archi-Graphics: Revit's Best Kept Secret
1:00 pm - 2:15 pm
Christopher Rossetto
Archi-Graphics: Revit's Best Kept Secret
1:00 pm - 2:15 pm
Christopher Rossetto
Visualisation, Architecture, General
Intermediate

Speaker:
Christopher Rossetto, Office for Metropolitan Architecture (OMA)

"Revit makes ugly drawings." We've all heard it, but how can we silence the critics? This class will look at the graphic styles of several leading design architects and demonstrate how these styles can be achieved in Revit, without the use of Photoshop or any other post-production tools.

Key Learning Outcomes:

  1. Learn how to create impressive drawings, diagrams and visuals directly from Revit.
  2. Understand how to get creative with the tools at hand and think outside the box to assemble presentation images.
  3. Teach you Revit users to be more efficient in a single-platform workflow without post-production tools.

Applying Generative AEC Dynamics to a Parking Garage
2:30 pm - 3:45 pm
Sylvester Knudsen
Applying Generative AEC Dynamics to a Parking Garage
2:30 pm - 3:45 pm
Sylvester Knudsen
Computational Design, Architecture
All Levels

Speaker:
Sylvester Knudsen, MT Højgaard

Speaker:
Jesper Wallaert, MT Højgaard

This presentation will cover how MT Højgaard has automated and optimised the process of designing a parking garage, going from early concept to final estimation and simulation. We will take you through the workflow and show the possibilities in software that includes FormIT, Dynamo, Project Fractal, Revit and iTWO.

Key Learning Outcomes:

  1. Explore how you can use data to generate rule based models from concept to BIM.
  2. Learn how to utilise Generative Design for better decision making.
  3. Gain insight to object based estimation with QTO's.

LAB: Set your BIM Data Free: Connect Dynamo to Cloud Services
9:00 am - 10:15 am
Radu Gidei
LAB: Set your BIM Data Free: Connect Dynamo to Cloud Services
9:00 am - 10:15 am
Radu Gidei
Coding Content and Customisation, Architecture, Model Management
Expert

Speaker:
Radu Gidei, Grimshaw

Learn how and why you should use Dynamo to connect your BIM models to cloud-based SaaS tools, to improve productivity and unleash opportunities for automation and collaboration. Use Slack for alerts such as sync failures, a user opening a central model or to pass custom messages to the team.

Key Learning Outcomes:

  1. Understand the benefits of connecting Dynamo to third-party cloud services.
  2. Design and structure useful collaborative workflows between different tools.
  3. implement and connect Dynamo to 3rd party cloud tools and deploy to your company.

LAB: Life Cycle Assessment (LCA) with Tally Through Revit
10:45 am - 12:00 pm
Daniel Nielsen
LAB: Life Cycle Assessment (LCA) with Tally Through Revit
10:45 am - 12:00 pm
Daniel Nielsen
Simulation and Analysis, Architecture, Operations and Maintenance
All Levels

Speaker:
Daniel Nielsen, aDN

Lifecycle Assessments (LCA) to gain holistic sustainable design. This Lab will demonstrate how to use Revit models to perform LCA at any stage of the design process. Extend the sustainable analysis to materials environmental impact.

Key Learning Outcomes:

  1. Understand the concepts of Lifecycle Assessment within an architectural design process
  2. Learn how to interpret the results of a Lifecycle Assessment report to make informed design and material decisions
  3. Learn how to use Tally to augment material selection by using Revit models

Forum: Creating HR Commitment for BIM Implementation
1:00 pm - 2:15 pm
Virat Manchanda
Forum: Creating HR Commitment for BIM Implementation
1:00 pm - 2:15 pm
Virat Manchanda
Business Strategy and Leadership, General
All Levels

Speaker:
Virat Manchanda, Imagine BIM

All technology exists only if implemented by people. That is the fundamental bastion to be conquered even for successful BIM Implementation. This class will be an interactive discussion on "The Human Element" and how to create an environment within the organisation that facilitates accelerated acceptance of BIM in the people.

Key Learning Outcomes:

  1. Understanding the Human Element of BIM Implementation and how to motivate people to take initiative to adopt BIM.
  2. Learning people strategies that allow for a smooth transition to higher levels of BIM adoption.
  3. Identify current challenges in the space of HR within your own organisation to BIM implementation and possibly find answers to them.

Forum: Workshop for Creating A Draft of Your BIM Operations Manual
2:30 pm - 3:45 pm
Virat Manchanda
Forum: Workshop for Creating A Draft of Your BIM Operations Manual
2:30 pm - 3:45 pm
Virat Manchanda
Business Strategy and Leadership, General, Planning
All Levels

Speaker:
Virat Manchanda, Imagine BIM

Business Owners often have to abandon technical aspects of working and take on systems and processed set-up to ensure project delivery. In this workshop, you will create a structure of the draft of your Company's BIM Operations and Manual, a critical tool in managing the complexities of project delivery using BIM.

Key Learning Outcomes:

  1. Get experience into the dynamics of collaboration with external consultants while creating trust and transparency in the space of BIM.
  2. Gain deeper knowledge into the extent of your own commitment towards creating a truly collaborative working environment both within your organisation as well as with external stakeholders.
  3. Get on the field practice in formulating a BIM Operations Manual. This is a document which you can build on once you return.

LAB: Architects and Engineers, Songs of Love and Hate Part 2
9:00 am - 12:00 pm
Peter Kompolschek
LAB: Architects and Engineers, Songs of Love and Hate Part 2
9:00 am - 12:00 pm
Peter Kompolschek
Simulation and Analysis, Architecture, MEP
Expert

Speaker:
Peter Kompolschek, Kompolschek Architects

In this lab you will learn to collect MEP elements located in a given area, estimate their weights and calculate how this additional weight will affect the structural system of floors / areas / rooms. Results are stored both in Revit and a MySQL database. A PDF-document is created too.

Key Learning Outcomes:

  1. Learn the use of Dynamo for fully equipped BIM models.
  2. Interact with the Office REST API.
  3. Python

Forum: Working with Multiple Generations
1:00 pm - 2:15 pm
Desiree Mackey
Forum: Working with Multiple Generations
1:00 pm - 2:15 pm
Desiree Mackey
Business Strategy and Leadership, General
All Levels

Speaker:
Desiree Mackey, Martin/Martin

This session will host panelists born in different generations. Questions will be asked of the panelists with a goal to establish a dialogue that examines generational differences. Understanding and appreciating the uniqueness of each group will help establish a successfully collaborative environment in a multi-generational workplace.

Key Learning Outcomes:

  1. Consider the implications of having so many generations working together.
  2. Discuss differences between the various generations.
  3. Learn a little bit about the other generations.

The Uniform Object Library: Using Open Standards and a Paramtetric IFC Project Library Definition
2:30 pm - 3:45 pm
Mark Wieringa and Martijn de Riet
The Uniform Object Library: Using Open Standards and a Paramtetric IFC Project Library Definition
2:30 pm - 3:45 pm
Mark Wieringa and Martijn de Riet
Coding Content and Customisation, Business Strategy and Leadership, Model Management
All Levels

Speaker:
Mark Wieringa, Bimforce
Co-Speaker:
Martijn de Riet, Bimforce

The aim of the Uniform Object Library is to create a platform independent solution for the creation of BIM-content. It uses multiple Open standards: IFC4, ETIM, CB-NL, NL-RS. Uniform Object Definitions are created using the IfcProjectLibrary in IfcOWL, Ontology Web Language, created by the linked data group of BuildingSmart.

Key Learning Outcomes:

  1. The use of open standard IFC in the creation of platform independant content.
  2. Workflow: concept generic specific maintenance.
  3. Industry standards