Schedule

Thu 5th Apr 2018

5 Apr - 7 Apr 2018

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: Business Strategy and Leadership
Tag: Civil
Tag: Coding, Content and Customisation
Tag: Construction
Tag: Data Management
Tag: DfMA
Tag: MEP
Tag: Model Management
Tag: Operations and Maintenance
Tag: Project Control
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
Platform: Autodesk
Platform: Bentley
Platform: Graphisoft
Platform: Multi-Platform
Tag: Project Planning
Platform: Non-Vendor Specific
Platform: Plug-in
Platform: Other
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
Thu 5th
Thu 5th
Thu 5th
Welcome Tea & Coffee/ Registration & Exhibition Open
7:30 am - 9:00 am
Welcome Tea & Coffee/ Registration & Exhibition Open
7:30 am - 9:00 am
 
 
 

Chairman Introduction
9:00 am - 9:30 am
Wesley Benn
Chairman Introduction
 
All Levels
 

Speaker:
Wesley Benn

Autodesk Sponsor Address
9:30 am - 9:40 am
Autodesk Sponsor Address
 
All Levels
 

Platinum Sponsor Address
9:40 am - 9:50 am
Platinum Sponsor Address
 
All Levels
 

Keynote Sponsor Address
9:50 am - 10:00 am
Keynote Sponsor Address
 
All Levels
 

Keynote Address
10:00 am - 11:00 am
Paul Doherty - The Digit Group
Keynote Address
10:00 am - 11:00 am
Paul Doherty - The Digit Group
 
All Levels
 

Morning Tea
11:00 am - 11:30 am
Morning Tea
 
 
 

What is a BIM Manager?
11:30 am - 12:45 pm
Dan Morrison
What is a BIM Manager?
11:30 am - 12:45 pm
Dan Morrison
Model Management, Project Planning
Advanced
Non-Vendor Specific

Speaker:
Dan Morrison, BIMtelligence

What is a BIM Manager? It is a job description that is often used, but what exactly does a BIM Manager do. This presentation will show how the skill sets required by BIM Managers can differ greatly depending on the roles they are required to fulfil.

Key Learning Outcomes:

  1. Learn about the different types of BIM Management and what roles they are to fulfil.
  2. Find out what the skill sets are for the different BIM Management roles.
  3. Learn about combining the use of BIM for both design and construction - or Virtual Design and Construction (VDC).

Session 1.2
11:30 am - 12:45 pm
Session 1.2
11:30 am - 12:45 pm
 
 
 

Lunch
12:45 pm - 1:45 pm
Lunch
12:45 pm - 1:45 pm
 
 
 

Taking the Highest Challenge in the Collaborative Process: The BIM Leading Consultant
1:45 pm - 3:00 pm
Chiara C. Rizzarda
Taking the Highest Challenge in the Collaborative Process: The BIM Leading Consultant
1:45 pm - 3:00 pm
Chiara C. Rizzarda
Business Strategy and Leadership, Project Controls
Advanced
Non-Vendor Specific

Speaker:
Chiara C. Rizzarda, Digital Strategies

Co-Speaker:
Claudio Vittori Antisari, Digital Strategies

As a collaborative set of protocols, BIM brings together professionals from different environments, each one with its own set of standards. This calls for one of them to be in charge of the tasks needed in order to set up a Collaboration process. We call this the BIM leading consultant.

Key Learning Outcomes:

  1. Identify the impact different styles of coordination have on a project.
  2. Understand what's the difference between having a process coordinated by a field specialist and one with a more holistic approach.
  3. Follow the coordination process throughout different stages and see which are the more significant strategies to go along with it.

Session 1.3
1:45 pm - 3:00 pm
Session 1.3
1:45 pm - 3:00 pm
 
 
 

Changeover
3:00 pm - 3:15 pm
Changeover
 
 
 

Session 1.4
3:15 pm - 4:30 pm
Session 1.4
3:15 pm - 4:30 pm
 
 
 

Improve Workflow: Paper Prototype Your Project's BIM Strategy for User Ability
3:15 pm - 4:30 pm
Elaine Lee
Improve Workflow: Paper Prototype Your Project's BIM Strategy for User Ability
3:15 pm - 4:30 pm
Elaine Lee
Project Planning, Project Controls
Intermediate
Non-Vendor Specific

Speaker:
Elaine Lee, Perkins Eastman

Project teams confused by BIM setup and process? Try paper prototyping to describe and validate the process. In this workshop: 1. Generate project BIM plans as model maps (how files link and content locations) 2. Turn model maps into "paper prototypes." 3. Test with each other for viability, understanding, user-ability.

Key Learning Outcomes:

  1. Develop and get peer feedback on BIM strategies that incorporate project goals and accommodate project constraints and expectations.
  2. Describe and connect team members to current BIM strategies to maintain and improve project standards proactively.
  3. Identify minimum viable strategies that can be quickly added to projects to enhance existing workflows.

Afternoon Tea
4:30 pm - 5:00 pm
Afternoon Tea
 
 
 

The Pilot Approach: Proving the ROI on BIM for Facilities Management
5:00 pm - 6:15 pm
Leo Salce
The Pilot Approach: Proving the ROI on BIM for Facilities Management
5:00 pm - 6:15 pm
Leo Salce
Operations and Maintenance, Data Management
Advanced
Multi-Platform

Speaker:
Leo Salce, Microdesk

There is an irony in that one of the most valuable benefits of BIM is hardly capitalized by the owner and that BIM traditionally dies at the end of construction and that the process of close out has not changed in decades. Explore how this is about to change.

Key Learning Outcomes:

  1. Review common challenges in operations for building markets significantly impacted by a BIM enabled process.
  2. Learn a step-by-step, risk-averse, practical approach to implementing a BIM for FM and Operations.
  3. Examine dozens of tangible use cases, derived from two case studies, empowered by a BIM for FM enabled process.

Session 1.5
5:00 pm - 6:15 pm
Session 1.5
5:00 pm - 6:15 pm
 
 
 

Break
6:15 pm - 6:30 pm
Break
 
 
 

Welcome Function proudly sponsored by BIM & Co. and Newforma
6:30 pm - 8:30 pm
Welcome Function proudly sponsored by BIM & Co. and Newforma
6:30 pm - 8:30 pm
 
 
 


The Welcome Function provides an opportunity to network with friends and colleagues, while enjoying a drink and canapes in the Exhibition Area.
Dress: Smart Casual

From Idea to 3D Printed Reality: A 3D Printed Building and Explorations of Additive Manufacturing in Architecture Design
11:30 am - 12:45 pm
Jorge Barrero
From Idea to 3D Printed Reality: A 3D Printed Building and Explorations of Additive Manufacturing in Architecture Design
11:30 am - 12:45 pm
Jorge Barrero
Architecture, DfMA
Expert
 

Speaker:
Jorge Barrero, HKS

Based on 3D printing technology from WinSun Global, insight behind the design process and digital technology used to create the first 3D printed building in Dubai will be presented. In addition, a glimpse into HKS LINE and process innovation.

Key Learning Outcomes:

  1. Learn about the pros and cons of 3D printing in the construction industry.
  2. Learn about the economic and environmental benfits of 3D printing architecture.
  3. Learn about current challenges that need to make 3D printing buildings a standard practice.

Presentation
1:45 pm - 3:00 pm
Presentation
1:45 pm - 3:00 pm

MEP Construction with Graphical Programming (Dynamo)
3:15 pm - 4:30 pm
Umit Balaban
MEP Construction with Graphical Programming (Dynamo)
3:15 pm - 4:30 pm
Umit Balaban
MEP
Intermediate
Autodesk

Speaker:
Umit Balaban, Anel Group

This is a good case study on how to develop MEP design projects to Construction projects. Graphical programming help MEP construction models.

Key Learning Outcomes:

  1. Learn how to Dynamo and API developer teams help in MEP construction projects.
  2. Learn how to develop design model to construction model.
  3. Learn relationship Revit and Excel.

Standard Management for 25 Models Across 7 Sites
5:00 pm - 6:15 pm
Dale Harrison
Standard Management for 25 Models Across 7 Sites
5:00 pm - 6:15 pm
Dale Harrison
Model Management, Structure
All Levels
Autodesk

Speaker:
Dale Harrison, AECOM

This session's primary focus will be on the challenge of managing standards of a single set of standard across 25 models with seven sets of deliverables. The workflow and process to maintain a single detail file which is nested and maintained with in 25 files across seven sites.

Key Learning Outcomes:

  1. Learn how to Managing standards in multiple files.
  2. Shopping basket approach to details managements.
  3. Standards.

Lab: Navisworks Clash Detection: Saving Time and $$$ by setting up Clash Templates
11:30 am - 12:45 pm
Deepak Maini
Lab: Navisworks Clash Detection: Saving Time and $$$ by setting up Clash Templates
11:30 am - 12:45 pm
Deepak Maini
Model Management, Construction
Expert
Autodesk

Speaker:
Deepak Maini, Cadgroup Australia

Clash detection is an important part of BIM delivery. This class focuses on saving time by setting up clash templates to be used in a variety of projects.

Key Learning Outcomes:

  1. Learn how to create simple and complex search sets in Navisworks.
  2. Learn how to run various BIM Level 1 and 2 clash tests based on search sets.
  3. Learn how to export and import clash templates to run clash tests in variety of projects.

Presentation
1:45 pm - 3:00 pm
Presentation
1:45 pm - 3:00 pm
 
 
 

Presentation
3:15 pm - 4:30 pm
Presentation
3:15 pm - 4:30 pm

Presentation
3:15 pm - 4:30 pm
Presentation
3:15 pm - 4:30 pm

Presentation
5:00 pm - 6:15 pm
Presentation
5:00 pm - 6:15 pm
 
 
 

Presentation
11:30 am - 12:45 pm
Presentation
11:30 am - 12:45 pm

Taking BIM for Structural Engineering to Infinity and Beyond
11:30 am - 12:45 pm
Matt Wash
Taking BIM for Structural Engineering to Infinity and Beyond
11:30 am - 12:45 pm
Matt Wash
Structure, Business Strategy and Leadership
All Levels
Multi-Platform

Speaker:
Matt Wash, BVN

The class will focus on interoperability between structural analysis software and digital design/ documentation tools. Gaining maximum benefit from of parametric modelling tools, such as Dynamo and Grasshopper software, and using optimization techniques, Matt will demonstrate how "Open BIM" can provide the foundation to successful collaboration.

Key Learning Outcomes:

  1. Gain insight into the training opportunities and the skill set your team will need to stay ahead of your competitors by formulating a digital transformation strategy.
  2. Learn how to optimize structural solutions to provide sustainable design choices that are buildable and cost-effective.
  3. Gain a better understanding of the needs of all stakeholders in the life-cycle of a project, and learn how your design can be flexible to accommodate future changes.

Lab: Re Invent Revit: Inventor For Revit Users!!
1:45 pm - 3:00 pm
Behzad Meskini
Lab: Re Invent Revit: Inventor For Revit Users!!
1:45 pm - 3:00 pm
Behzad Meskini
Model Management, Architecture
All Levels
Autodesk

Speaker:
Behzad Meskini, DP Architect Pte Ltd

Best workflow for all Revit User to become Inventor user. We will use main mindset for modelling that is coming from Revit and we will teach about Base Feature, Makeup Feature and Parametric Modelling Process in Inventor. Also we will talk about documentation and transfering model from Inventor to Revit.

Key Learning Outcomes:

  1. Understand about file workflow and similarity between Inventor and Revit.
  2. How they should start Family in Inventor and what are the tools for this according to the Family Environment in Revit.
  3. How they can make Project in Inventor and bring Family into that, according to the Project Environment in Revit.

Lab: Re Invent Revit: Inventor for Revit Users!!
3:15 pm - 4:30 pm
Behzad Meskini
Lab: Re Invent Revit: Inventor for Revit Users!!
3:15 pm - 4:30 pm
Behzad Meskini

Speaker:
Behzad Meskini, DP Architect Pte Ltd

Best workflow for all Revit User to become Inventor user. We will use main mindset for modelling that is coming from Revit and we will teach about Base Feature, Makeup Feature and Parametric Modelling Process in Inventor. Also we will talk about documentation and transfering model from Inventor to Revit.

Key Learning Outcomes:

  1. Understand about file workflow and similarity between Inventor and Revit.
  2. How they should start Family in Inventor and what are the tools for this according to the Family Environment in Revit.
  3. How they can make Project in Inventor and bring Family into that, according to the Project Environment in Revit.

Virtual Reality: An Implementation in Architectural Practice
5:00 pm - 6:15 pm
Gerard Teo
Virtual Reality: An Implementation in Architectural Practice
5:00 pm - 6:15 pm
Gerard Teo
Visualisation, Architecture
Intermediate
Multi-Platform

Speaker:
Gerard Teo, ID Architects Pte Ltd

Virtual Reality has progressed to the point where the hardware can currently create a "suspension of disbelief"; making the virtual real and proving viable to integrate into the industry workflow. However, as VR currently exists on the bleeding edge and is an entirely new medium, utility and application are issues.

Key Learning Outcomes:

  1. V/A/ MR in AEC.
  2. Possible current and future applications.
  3. Lessons learnt from a case study in implementation.

Lab: Model Groups and a Healthy Design Workflow
11:30 am - 12:45 pm
Joseph Darling
Lab: Model Groups and a Healthy Design Workflow
11:30 am - 12:45 pm
Joseph Darling
Architecture, Model Management
Advanced
Autodesk

Speaker:
Joseph Darling, Perkins Eastman

A healthy design workflow is a happy design workflow. By the end of this session, you'll know how to take charge of your model groups, ensure their proper placement, and say goodbye to 'Inconsistent Groups'.

Key Learning Outcomes:

  1. Understand the fundamentals of Model Groups and their part in your free, fluid design workflow.
  2. Improve your design consistency and coordination while eliminating the risk of 'Inconsistent Groups'.
  3. Leverage Dynamo to ensure proper Model Group placement and visually identify misalignments.

Lab: Taking Control: Construction Quality Control using Verity
1:45 pm - 3:00 pm
Kelly Cone
Lab: Taking Control: Construction Quality Control using Verity
1:45 pm - 3:00 pm
Kelly Cone
Construction, Project Controls
Intermediate
Multi-Platform

Speaker:
Kelly Cone, ClearEdge3D

This Lab will teach you how to use laser scanning and Verity to check the quality of work on your jobsite or as-built models! Utilizing your BIMs and our advanced computer vision algorithms, you can know how well your job is being built/ modeled in minutes rather than days. Take control!

Key Learning Outcomes:

  1. How laser scanning can be used to document and check the quality of work on the jobsite.
  2. How to use Verity to automatically check the installation status and conformance to tolerance of your work.
  3. How to update your BIMs to an As-built state using Verity and Navisworks.

Lab: Taking Control: Construction Quality Control using Verity
3:15 pm - 4:30 pm
Kelly Cone
Lab: Taking Control: Construction Quality Control using Verity
3:15 pm - 4:30 pm
Kelly Cone
Construction, Project Controls
Intermediate
Multi-Platform

Speaker:
Kelly Cone, ClearEdge3D

This Lab will teach you how to use laser scanning and Verity to check the quality of work on your jobsite or as-built models! Utilizing your BIMs and our advanced computer vision algorithms, you can know how well your job is being built/ modeled in minutes rather than days. Take control!

Key Learning Outcomes:

  1. How laser scanning can be used to document and check the quality of work on the jobsite.
  2. How to use Verity to automatically check the installation status and conformance to tolerance of your work.
  3. How to update your BIMs to an As-built state using Verity and Navisworks.

Lab: Sketch Modelling Adoption in Building Information Models
5:00 pm - 6:15 pm
Anesh Narsai
Lab: Sketch Modelling Adoption in Building Information Models
5:00 pm - 6:15 pm
Anesh Narsai
Architecture, Model Management
Intermediate
Non-Vendor Specific

Speaker:
Anesh Narsai, Cox Architecture

Design technology applications should not be limited to platforms that appease a BIM eco-system and so it is the role of the BIM Manager or Design Technology experts to overcome limitations inherent in sketch modelling applications. The speaker will share lessons learnt in overcoming sophisticated design challenges for BIM delivery.

Key Learning Outcomes:

  1. Software Interoperability.
  2. Harnessing visual programming.
  3. Sketch modelling adoption in Building Information Models.

5 Apr - 7 Apr 2018

Fri 6th Apr 2018

5 Apr - 7 Apr 2018

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: Business Strategy and Leadership
Tag: Civil
Tag: Coding, Content and Customisation
Tag: Construction
Tag: Data Management
Tag: DfMA
Tag: MEP
Tag: Model Management
Tag: Operations and Maintenance
Tag: Project Control
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
Platform: Autodesk
Platform: Bentley
Platform: Graphisoft
Platform: Multi-Platform
Tag: Project Planning
Platform: Non-Vendor Specific
Platform: Plug-in
Platform: Other
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
Fri 6th
Fri 6th
Fri 6th
Welcome Tea & Coffee/ Registration Open
8:00 am - 9:30 am
Welcome Tea & Coffee/ Registration Open
8:00 am - 9:30 am
 
 
 

Session 2.1
9:00 am - 10:45 am
Session 2.1
9:00 am - 10:45 am
 
 
 

Autodesk Address
9:00 am - 9:45 am
Autodesk Address
9:00 am - 9:45 am
 
 
 

Expert Panel proudly sponsored by ClearEdge
9:45 am - 10:45 am
Expert Panel proudly sponsored by ClearEdge
9:45 am - 10:45 am
 
 
 

Morning Tea
10:45 am - 11:15 am
Morning Tea
 
10:45 am - 11:15 am
 

Implement Anything: A Generalized Theory of Technology Implementation and Process Change
11:15 am - 12:30 pm
Kelly Cone
Implement Anything: A Generalized Theory of Technology Implementation and Process Change
11:15 am - 12:30 pm
Kelly Cone
Business Strategy and Leadership, Data Management
Intermediate
Non-Vendor Specific

Speaker:
Kelly Cone, ClearEdge3D

Stuck in a rut implementing a new technology? Feel like you're fighting the system? Can't seem to get the funding or support to drive your innovation through to success? This lecture will share a framework developed over 10 years of AEC implementations to help you succeed at implementing anything...

Key Learning Outcomes:

  1. Learn how to classify your innovation into one of eight types, and what that classification means for how it should be implemented.
  2. Understand how your company's characteristics impact how it accepts change so you can predict what you'll need to be successful.
  3. Learn about the key components of a good implementation plan, and how it can help align and energize the company, the people, and the way you implement the change.

Session 2.2
11:15 am - 12:30 pm
Session 2.2
11:15 am - 12:30 pm
 
 
 

Lunch
12:30 pm - 1:30 pm
Lunch
12:30 pm - 1:30 pm
 
 
 

Dimensions to BIM: Linking 3D to 4D and 5D Case Studies
1:30 pm - 2:45 pm
Scott Beazley
Dimensions to BIM: Linking 3D to 4D and 5D Case Studies
1:30 pm - 2:45 pm
Scott Beazley
Data Management, Project Controls
Advanced
Other: Revit, Solibri Model Checker, Navisworks, P6, MS Project, COSTX

Speaker:
Scott Beazley, Mitchell Brandtman

Dimensions to BIM: Linking 3D to 4D and 5D Case Studies Integration of data rich 3D building models with 4D construction schedules and 5D costings provide valuable tools for project designers and contractors. It sounds simple, but why is it not more commonly used? A number of case studies will demonstrate a methodology of linking a range of data types together.

Key Learning Outcomes:

  1. Learn how to setup 3D models required for linking to schedules and costings.
  2. Learn how to setup 4D construction parameters and structure 5D detailed costings for linking to 3D models.
  3. Link 3D, 4D and 5D data sets to create visual simulations for project analyses.

Session 2.3
1:30 pm - 2:45 pm
Session 2.3
1:30 pm - 2:45 pm
 
 
 

Changeover
2:45 pm - 3:00 pm
Changeover
 
 
 

Session 2.4
3:00 pm - 4:15 pm
Session 2.4
3:00 pm - 4:15 pm
 
 
 

Session 2.4
3:00 pm - 4:15 pm
Session 2.4
3:00 pm - 4:15 pm

Implementing Revit Twice... The Story of Two BIMs
3:00 pm - 4:15 pm
Jeames Hanley
Implementing Revit Twice... The Story of Two BIMs
3:00 pm - 4:15 pm
Jeames Hanley
Business Strategy and Leadership, Model Management
Intermediate
Autodesk

Speaker:
Jeames Hanley, Warren and Mahoney

With Revit being used on BIM and non-BIM projects alike, over documentation and over delivery of non-BIM projects is a real problem. How do you educate design teams that sometimes you just need to use Revit to deliver 2D drawings?

Key Learning Outcomes:

  1. How to manage outputs for non BIM projects.
  2. What tools can you use for non-BIM project coordination.
  3. How a Revit modelling guideline can be used to align the design team on non-BIM projects.

Afternoon Tea
4:15 pm - 4:45 pm
Afternoon Tea
 
 
 

Practical IOT in BIM for Operations
4:45 pm - 6:00 pm
Leo Salce
Practical IOT in BIM for Operations
4:45 pm - 6:00 pm
Leo Salce
Operations and Maintenance, Data Management
Expert
Multi-Platform

Speaker:
Leo Salce, Microdesk

IOT is transforming how we interact with a space and how it?s managed and BIM is becoming a catalyst for smarter buildings in unprecedented ways. Make sense of sensors and data driving asset and facility management and the implications of BIM+AI changing how we approach and understand the world's information.

Key Learning Outcomes:

  1. Learn about practical uses of sensor data in a BIM enabled process for Operations.
  2. Learn about current technologies and processes that support the integration of BIM for facilities and asset management and Cognitive IOT.
  3. Learn a step-by- step practical approach to implementing a process that will capitalize on the IOT device data in FM operations.

Session 2.5
4:45 pm - 6:00 pm
Session 2.5
4:45 pm - 6:00 pm
 
 
 

Break
6:00 pm - 6:30 pm
Break
 
 
 

Friday Evening Function (Offsite) proudly sponsored by Luminova Japan (Marubeni)
7:00 pm - 10:00 pm
Friday Evening Function (Offsite) proudly sponsored by Luminova Japan (Marubeni)
7:00 pm - 10:00 pm
 
 
 

This is the second social function during BILT Asia; join us offsite and have the opportunity to network with friends and colleagues, whilst enjoying a drink and canapes.
Dress: Smart Casual

Surveying and Scanning - What, Why and How?
11:15 am - 12:30 pm
Daniel Kruimel
Surveying and Scanning - What, Why and How?
11:15 am - 12:30 pm
Daniel Kruimel
Visualisation, Data Management
All Levels
Other

Speaker:
Daniel Kruimel, AAM

Like many industries, surveying has seen a vast evolution of technology over the last two decades - particularly in the area of 3D Laser Scanning. This session will introduce various types of data collection methods to create 'reality as built models.' A live scanning demo will also be included.

Key Learning Outcomes:

  1. Learn about the various types of 3D laser scanning along with the benefits and limitations of each method.
  2. Understand how 3D laser scanning is being used on other projects through a series of case studies.
  3. See a live demonstration of 3D laser scanning data acquisition and processing.

Presentation
1:30 pm - 2:45 pm
Presentation
1:30 pm - 2:45 pm

Bridging the Gap Between Revit and Space Gass
1:30 pm - 2:45 pm
Dale Harrison
Bridging the Gap Between Revit and Space Gass
1:30 pm - 2:45 pm
Dale Harrison
Structure
All Levels
Autodesk

Speaker:
Dale Harrison, AECOM

The updates and changes to Revit have seen a dramatic improvement in the ability to manipulate the analytical mode. This has made the Bi-directional workflow viable in Revit for project use. This presentation will be desirable how you can bridge the gap between analysis and modelling.

Key Learning Outcomes:

  1. The fundamental understating of the analytical more within Revit.
  2. Learn how to create a bi-directional model Revit to Space Gass.
  3. Learn how to create a Revit model from Space Gass.

Presentation
3:00 pm - 4:15 pm
Presentation
3:00 pm - 4:15 pm
 
 
 

Measure and Analyse the Pulse of your Revit Model using Dynamo
4:45 pm - 6:00 pm
Andrew Seyed Mehr
Measure and Analyse the Pulse of your Revit Model using Dynamo
4:45 pm - 6:00 pm
Andrew Seyed Mehr
Model Management, Data Management
All Levels
Autodesk

Speaker:
Andrew Seyed Mehr, BVN

Measure and analyse the pulse of your Revit model using Dynamo!

Key Learning Outcomes:

  1. Understand how to extract and mange information from your Revit model.
  2. Learning how to visualise extracted data as a dashboard to gain insights into your Revit model behavior.
  3. Find common issues and define strategies that impact your model and project team performance.

Worksharing Outside the Box with BIM360 - Collaboration For Revit
11:15 am - 12:30 pm
Mike Greisen
Worksharing Outside the Box with BIM360 - Collaboration For Revit
11:15 am - 12:30 pm
Mike Greisen
Model Management, Data Management
Guru
Autodesk

Speaker:
Mike Greisen, Aurecon

An in-depth look at customising the BIM360 C4R platform to allow worksharing of the largest projects with regions with weak infrastructure.

Key Learning Outcomes:

  1. Learn how best practice can increase performance in the 'out the box' BIM360/ C4R environment.
  2. Learn how to tweak the system to facilitate worksharing with BIM360/ C4R in areas with weak infrastructure on large projects.
  3. Learn about the dangers and pitfalls associated with worksharing in the modified C4R environment.

Bridging the Gap between Revit and Space Gass
1:30 pm - 2:45 pm
Dale Harrison
Bridging the Gap between Revit and Space Gass
1:30 pm - 2:45 pm
Dale Harrison
Tags
Level

The updates and changes to Revit have seen a dramatic improvement in the ability to manipulate the analytical mode. This has made the Bi-directional workflow viable in Revit for project use. This presentation will be desirable how you can bridge the gap between analysis and modelling. All Levels Technical Presentation Tag: Structure Platform: Autodesk

Presentation
1:30 pm - 2:45 pm
Presentation
1:30 pm - 2:45 pm
 
 
 

Lab: Photographs (not Photogrammetry) to BIM: A Quick and Practical Alternative for Scan to BIM
3:00 pm - 4:15 pm
Virat Manchanda
Lab: Photographs (not Photogrammetry) to BIM: A Quick and Practical Alternative for Scan to BIM
3:00 pm - 4:15 pm
Virat Manchanda
Architecture, Project Planning
All Levels
 

Speaker:
Virat Manchanda, Imagine BIM

You?ve heard of AutoCAD to BIM, Photogrammetry to BIM and even Scan to BIM. In this session, we introduce 'Photographs to BIM'! In this lab you will learn a workflow by which you will be able to produce a BIM model of significant accuracy using simple everyday photographs.

Key Learning Outcomes:

  1. Learn a new and unexpected workflow of using everyday photographs to a significantly accurate BIM Model.
  2. Learn different uses that this method can be used for in the real world.
  3. Brainstorm with your fellow participants and use their perspectives and experience to discover new real world applications for this process.

Presentation
4:45 pm - 6:00 pm
Presentation
4:45 pm - 6:00 pm
 
 
 

Speaker:

Manage a Project in 7 Months with Phasing... Design Options... and Other Tools
11:15 am - 12:30 pm
Elaine Lee
Manage a Project in 7 Months with Phasing... Design Options... and Other Tools
11:15 am - 12:30 pm
Elaine Lee
Architecture, Project Planning
Intermediate
Autodesk

Speaker:
Elaine Lee, Perkins Eastman

Learn Revit strategies from the shortest project ever. How to incorporate phasing, design options, and Dynamo to manage a project that was designed, documented, constructed, and occupied in 7 Months. Successful and unsuccessful approaches will be discussed, as well as how to adjust them for the next project.

Key Learning Outcomes:

  1. Understand how to incorporate phasing and design options into design documentation at start of the project.
  2. Identify and manage risks when developing Revit strategies in response to project specific constraints.
  3. How to create a "sandbox" to carefully incorporate new tools, such as Dynamo, to support working fast from a project management perspective.

Lab: Photographs (not Photogrammetry) to BIM: A Quick and Practical Alternative for Scan to BIM
1:30 pm - 2:45 pm
Virat Manchanda
Lab: Photographs (not Photogrammetry) to BIM: A Quick and Practical Alternative for Scan to BIM
1:30 pm - 2:45 pm
Virat Manchanda
Architecture, Project Planning
All Levels
 

Speaker:
Virat Manchanda, Imagine BIM

You've heard of AutoCAD to BIM, Photogrammetry to BIM and even Scan to BIM. In this session, we introduce 'Photographs to BIM'! In this lab you will learn a workflow by which you will be able to produce a BIM model of significant accuracy using simple everyday photographs.

Key Learning Outcomes:

  1. Learn a new and unexpected workflow of using everyday photographs to a significantly accurate BIM Model.
  2. Learn different uses that this method can be used for in the real world.
  3. Brainstorm with your fellow participants and use their perspectives and experience to discover new real world applications for this process.

Let's Set-up Our Own BIM Database with Excel, Revit and Dynamo - and Say Goodbye to Third Party Add-ins Together
3:00 pm - 4:15 pm
Norris Ng
Let's Set-up Our Own BIM Database with Excel, Revit and Dynamo - and Say Goodbye to Third Party Add-ins Together
3:00 pm - 4:15 pm
Norris Ng
Coding Content and Customisation, Data Management
Intermediate
Autodesk

Speaker:
Norris Ng, Gammon Construction Ltd

Set-up customized database for Revit with Excel and Dynamo without using third-party add-in or applications.

Key Learning Outcomes:

  1. Sample Dynamo scripts to batch add shared parameters and link information to them.
  2. Sample method to handle standardized shared parameters and organise relevant database in Excel format.
  3. Some methods to visualize customized shared parameters such as using Revit built-in filter function and data tool in Navisworks Manager.

Lab: Filling the Gap Between 2D and 3D
4:45 pm - 6:00 pm
Kelvin Tam
Lab: Filling the Gap Between 2D and 3D
4:45 pm - 6:00 pm
Kelvin Tam

Speaker:
Kelvin Tam, DP Architects

Have you found out even when you have well modeled it, the plan view can hardly match traditional graphical representation of certain elements such as ramps, escalators and elevators. This Lab session will show you the tricks.

Key Learning Outcomes:

  1. Creating 3D geometry in Family.

Lab: Revit Fabrication Parts - Design to Construction Lab
11:15 am - 12:30 pm
Ralph Schoch
Lab: Revit Fabrication Parts - Design to Construction Lab
11:15 am - 12:30 pm
Ralph Schoch
MEP, Construction
All Levels
Autodesk

Speaker:
Ralph Schoch, Victaulic

Learn new features in Revit 2019 that allow you to add standardized MEP manufacturer content to your design. Using Fabrication Parts you can validate your design and reduce request for information during the construction process.

Key Learning Outcomes:

  1. Learn to validate your design model to reduce issues from the field.
  2. Learn how to access standardized MEP content that reduce routing errors.
  3. Efficiently make coordination and design changes.

Lab: Everyday Dynamo: Practical Uses for BIM Managers
1:30 pm - 2:45 pm
Scott Crichton
Lab: Everyday Dynamo: Practical Uses for BIM Managers
1:30 pm - 2:45 pm
Scott Crichton
Coding Content and Customisation, Model Management
Advanced
Autodesk

Speaker:
Scott Crichton, BVN

There are many day-to-day laborious tasks that an Architect needs to perform. By harnessing the power of the Dynamo Package Manager, the class will demonstrate how to extend Revit's capabilities to maintain your Revit model.

Key Learning Outcomes:

  1. Understand and identify opportunities for Dynamo to be implemented into your day-to-day BIM workflow.
  2. Learn how to maintain your Revit model.
  3. Learn how to harness the power of the Dynamo Package Manager.

Lab: Everyday Dynamo: Practical Uses for BIM Managers
3:00 pm - 4:15 pm
Scott Crichton
Lab: Everyday Dynamo: Practical Uses for BIM Managers
3:00 pm - 4:15 pm
Scott Crichton
Coding Content and Customisation, Model Management
Advanced
Autodesk

Speaker:
Scott Crichton, BVN

There are many day-to-day laborious tasks that an Architect needs to perform. By harnessing the power of the Dynamo Package Manager, the class will demonstrate how to extend Revit's capabilities to maintain your Revit model.

Key Learning Outcomes:

  1. Understand and identify opportunities for Dynamo to be implemented into your day-to-day BIM workflow.
  2. Learn how to maintain your Revit model.
  3. Learn how to harness the power of the Dynamo Package Manager.

Lab: Introduction to Python Programming using Revit Dynamo
4:45 pm - 6:00 pm
Jeremy Graham
Lab: Introduction to Python Programming using Revit Dynamo
4:45 pm - 6:00 pm
Jeremy Graham
Coding Content and Customisation, Data Management
Intermediate
Autodesk

Speaker:
Jeremy Graham, Cox Architects

This class provides an introduction to the Python programming language using the Dynamo Visual Programming tool in Revit. We will learn the fundamentals of object orientated programming including data types, conditionals, loops and importing modules by utilizing the Python node within Dynamo for Revit.

Key Learning Outcomes:

  1. Understand the basics of Python and Object Orientated Programming.
  2. Learn how to create Python scripts within Dynamo.
  3. Learn how to import .NET libraries using Python for Dynamo scripts.

5 Apr - 7 Apr 2018

Sat 7th Apr 2018

5 Apr - 7 Apr 2018

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: Business Strategy and Leadership
Tag: Civil
Tag: Coding, Content and Customisation
Tag: Construction
Tag: Data Management
Tag: DfMA
Tag: MEP
Tag: Model Management
Tag: Operations and Maintenance
Tag: Project Control
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
Platform: Autodesk
Platform: Bentley
Platform: Graphisoft
Platform: Multi-Platform
Tag: Project Planning
Platform: Non-Vendor Specific
Platform: Plug-in
Platform: Other
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
Sat 7th
Sat 7th
Sat 7th
Welcome Tea & Coffee/ Registration Open
8:00 am - 9:00 am
Welcome Tea & Coffee/ Registration Open
8:00 am - 9:00 am
 
 
 

Session 3.1
9:00 am - 10:15 am
Session 3.1
9:00 am - 10:15 am
 
 
 

Be a Group Leader - Managing Revit Groups
9:00 am - 10:15 am
Mark Schmieding
Be a Group Leader - Managing Revit Groups
9:00 am - 10:15 am
Mark Schmieding
Model Management
 
 

Speaker:
Mark Schmieding, bKL Architecture

Make Revit Groups work for you - This class will provide practical tips and information on the effective use of Groups in Revit. Topics discussed include organization, performance, features, tricks and methods relating to Detail and Model Groups in a project.

Key Learning Outcomes:

  1. Latest improvements, methods to maximize functionality.
  2. How to increase performance and ways to reduce annoyances.

Morning Tea
10:15 am - 10:45 am
Morning Tea
 
 
 

Dynamo Without the Need for Scripting
10:45 am - 12:00 pm
Mark Abrahams
Dynamo Without the Need for Scripting
10:45 am - 12:00 pm
Mark Abrahams
Coding Content and Customisation, Data Management
Advanced
Multi-Platform

Speaker:
Mark Abrahams, dwp

Keen to use Dynamo but just not sure about scripting? We'll go through how you and your office can make use of the Dynamo Player and what scripts are out there just waiting to be taken advantage of.

Key Learning Outcomes:

  1. Learn what cool Dynamo scripts are freely available to download and use.
  2. Learn what you need to do to roll these out to your users.
  3. How to improve the efficiency of your users.

Session 3.2
10:45 am - 12:00 pm
Session 3.2
10:45 am - 12:00 pm
 
 
 

Lunch
12:00 pm - 1:00 pm
Lunch
12:00 pm - 1:00 pm
 
 
 

Is Your BIM Ready for FM
1:00 pm - 2:15 pm
Mayurachat Chatsuwan
Is Your BIM Ready for FM
1:00 pm - 2:15 pm
Mayurachat Chatsuwan
Data Management, Operations and Maintenance
Intermediate
Multi-Platform

Speaker:
Mayurachat Chatsuwan, Limpini Wisdom Consulting and Solution Co. Ltd

How to design BIM for FM process during design and pre-construction stages. As the building investor provides a building operation and maintenance business service, the challenge of BIM for FM's strategy is how to design FM process that response to the existing or current inventory data management.

Key Learning Outcomes:

  1. How to design BIM for FM process during design and pre-construction stages.
  2. How to design FM process that response to the existing or current inventory data management.
  3. How to manage FM data and customized parameter and FM template.

Session 3.3
1:00 pm - 2:15 pm
Session 3.3
1:00 pm - 2:15 pm
 
 
 

Changeover
2:15 pm - 2:30 pm
Changeover
 
 
 

Session 3.4
2:30 pm - 3:45 pm
Session 3.4
2:30 pm - 3:45 pm
 
 
 

Afternoon Tea
3:45 pm - 4:15 pm
Afternoon Tea
 
 
 

Closing Plenary Session proudly sponsored by Synchro
4:15 pm - 5:30 pm
Closing Plenary Session proudly sponsored by Synchro
4:15 pm - 5:30 pm
 
 
 

Changeover
5:30 pm - 5:45 pm
Changeover
 
 
 

Speaker Debrief
5:45 pm - 6:30 pm
Speaker Debrief
5:45 pm - 6:30 pm
 
 
 

Break
6:30 pm - 6:45 pm
Break
 
 
 

Informal Dinner TBC proudly sponsored by WeWork
6:45 pm - 10:30 pm
Informal Dinner TBC proudly sponsored by WeWork
6:45 pm - 10:30 pm
 
 
 

Integrative Computational Design Workflow for Origami Modular Ceiling
9:00 am - 10:15 am
Zhifei Cheng
Integrative Computational Design Workflow for Origami Modular Ceiling
9:00 am - 10:15 am
Zhifei Cheng
Architecture, Model Management
Intermediate
Autodesk

Speaker:
Zhifei Cheng, Gensler

The presentation will demonstrate how integrative computational design workflow on Revit platform enhances complex ceiling design from decision-making, modeling to documentation in real practice. Use Dynamo to morph adaptive components on curved surface, generating design alterations, creating 2D fabrication files. Utilize shared parameters to generate precise schedule information for fabrication.

Key Learning Outcomes:

  1. Learn how to use adaptive components to build Origami geometrical modules using the method of nesting and hosting.
  2. Learn how to place adaptive panels on defined surface, generating alterations and variations using Dynamo script.
  3. Learn how to generate fabrication data from scheduling by shared parameter.

Walls before Ducts? Let's Find out from Design Milestone
10:45 am - 12:00 pm
Jiraporn Thammaraksa
Walls before Ducts? Let's Find out from Design Milestone
10:45 am - 12:00 pm
Jiraporn Thammaraksa
Project Planning, Business Strategy and Leadership
All Levels
 

Speaker:
Jiraporn Thammaraksa, Limpini Wisdom Consulting and Solution Company Ltd

Design Milestone for design process during the transition period for an effective use of clash detection and design review on BIM design process.

Key Learning Outcomes:

  1. Learn how to develop Design Milestone with BIM process in order to manage sequence of design process during design development stage.
  2. Acknowledge the difference of Design Milestone between traditional design process and BIM design process to analyze and apply to each project development.
  3. Learn the implementation of design milestone through case study to see the problem in each project development earlier.

Visualization World of Revit (Key Success)
1:00 pm - 2:15 pm
Takrit Jirawudomchai
Visualization World of Revit (Key Success)
1:00 pm - 2:15 pm
Takrit Jirawudomchai
Visualisation, Project Planning
Intermediate
Multi-Platform

Speaker:
Takrit Jirawudomchai, dwp

Visualization is to communicate of your design to the client. How can you make use of your Revit model in order to present your design and to provide client an experience? This session will discuss the multiple ways of visualization with Revit and other visualization applications.

Key Learning Outcomes:

  1. Understand the optional ways of visualization with Revit.
  2. Understand benefits and challenges of doing visualization with Revit.
  3. Learn how to improve the efficiency of your Revit model.

Pushing the Boundaries of Cost and Time
2:30 pm - 3:45 pm
Matt Hemming
Pushing the Boundaries of Cost and Time
2:30 pm - 3:45 pm
Matt Hemming
Construction, Simulation and Analysis
All Levels
Non-Vendor Specific

Speaker:
Matt Hemming, Mitchell Brandtman

Advanced 5D+4D BIM workflows are breaking down traditional barriers of how cost and time is understood and managed on projects. This case study will follow the 5D+4D implementation journey on a live multi-billion dollar rail infrastructure project for an international contracting giant.

Key Learning Outcomes:

Presentation
9:00 am - 10:15 am
Presentation
9:00 am - 10:15 am

Case Study: Metro Sports Facility, Christchurch
9:00 am - 10:15 am
Mike Greisen
Case Study: Metro Sports Facility, Christchurch
9:00 am - 10:15 am
Mike Greisen
Project Planning, Business Strategy and Leadership
All Levels
Multi-Platform

Speaker:
Mike Greisen, Aurecon

A look at how we developed systems and processes to deliver this key part of the Christchurch Rebuild.

Key Learning Outcomes:

  1. Learn about the Metro Sports Project in Christchurch.
  2. Learn about Geodocs platform.
  3. Learn about the digital workplan.

Capturing the Real World for Design, Analysis, and Immersive Experiences
10:45 am - 12:00 pm
Simon Yorke
Capturing the Real World for Design, Analysis, and Immersive Experiences
10:45 am - 12:00 pm
Simon Yorke
Visualisation, Simulation and Analysis
All Levels
Multi-Platform

Speaker:
Simon Yorke, Aurecon

The way we interact with the design process is evolving, from how we capture information about the world around us, to how we engage with design tools. This class will showcase how we've adopted emergent technology into daily workflows enabling us to perform tasks that seemed impossible not long ago.

Key Learning Outcomes:

  1. Learn how powerful reality capture technology has become.
  2. Understand the value drones play in both data capture and safety.
  3. See how Immersive experiences can provide a greater understanding of projects.

Revit Productivity Tips and Tricks
1:00 pm - 2:15 pm
Joe Banks
Revit Productivity Tips and Tricks
1:00 pm - 2:15 pm
Joe Banks
Architecture, Model Management
All Levels
Autodesk

Speaker:
Joe Banks, BIMedge

This class has over 100 tips to improve productivity and make an impact on your office. No plugins or Dynamo, just straightforward, helpful workflows to save you time and increase staff efficiency so you can spend more time on the things that really matter.

Key Learning Outcomes:

  1. Productive tips for selection and rapid modelling.
  2. Tips for worksets and visibility across files.
  3. Tips for Family creation to build more robust and stable families.

Bridging the Gap - Between Infrastructure and Craft
2:30 pm - 3:45 pm
Adam Kolsrud
Bridging the Gap - Between Infrastructure and Craft
2:30 pm - 3:45 pm
Adam Kolsrud
Civil, Construction
Advanced
Autodesk

Speaker:
Adam Kolsrud, John Wardle Architects

The Tanderrum Bridge offers a glimpse into a highly crafted piece of civic infrastructure - two ideas that are not typically shared in a single product. This case study will analyse the design and construction considerations required to complete a 390m long pedestrian walkway and bridge.

Key Learning Outcomes:

  1. Understanding the streamlining processes of 3D modelling, prototyping and fabrication.
  2. Understanding the challenges of trying to maintain a high level of craft and detail on the scale of civic infrastructure.
  3. A comprehension of the methodologies to manage variation within panelised construction.

Structural Data Mining using Revit-Dynamo-PowerBI Workflow
9:00 am - 10:15 am
Allan Cantos
Structural Data Mining using Revit-Dynamo-PowerBI Workflow
9:00 am - 10:15 am
Allan Cantos
Structure, Visualisation
All Levels
Autodesk

Speaker:
Allan Cantos, Ramboll UK Ltd.

The demonstration will focus on extracting structural data information, i.e Tonnage Summary, from Structural Revit Model using Dynamo and publish these values automatically into an Excel file which then link to Power BI where you can view the results interactively.

Key Learning Outcomes:

  1. Setting up schedules in Revit for each structural element in the Structural Revit model.
  2. Create a simple Dynamo graph that even a beginner can understand.
  3. Setting up the Excel spreadsheet where the data mined from Revit will be written and create a projects dashboard using Power BI with data mined from Revit.

Save Trees! Can we Get to Paperless Construction Documentation?
10:45 am - 12:00 pm
Scott Crichton
Save Trees! Can we Get to Paperless Construction Documentation?
10:45 am - 12:00 pm
Scott Crichton
Data Management, Model Management
All Levels
Multi-Platform

Speaker:
Scott Crichton, BVN

With the ever increasing requirements on projects for expanded BIM deliverables, why is it that we still have a reliance on static 2D documentation as the contract documentation? What needs to change in our industry for the BIM model to become the contract deliverable?

Key Learning Outcomes:

  1. How can we reduce the reliance of 2D deliverables?
  2. Learn how to develop workflows for producing data rich BIM deliverables.
  3. Gain insight into requirements of other sectors in our industry in regard to our BIM models.

Autodesk Advance Steel for BIM: Seamless Workflow from Design to Fabrication
1:00 pm - 2:15 pm
Deepak Maini
Autodesk Advance Steel for BIM: Seamless Workflow from Design to Fabrication
1:00 pm - 2:15 pm
Deepak Maini
Structure, Project Planning
Expert
Autodesk

Speaker:
Deepak Maini, Cadgroup Australia

Learn how Advance Steel and Revit interoperability allows you to leverage the design model to create steel connections, detailed drawings, and NC files.

Key Learning Outcomes:

  1. Learn how to export Autodesk Revit Structure model and import into Autodesk Advance Steel.
  2. Learn how to create automated steel connections between the members imported from Autodesk Revit.
  3. Learn how to sync and import any Autodesk Revit changes into Advance Steel or validate Advance Steel model in Autodesk Revit.

Unveil the Secret Behind Revit Model Performance: Why your Model is so Slow and How to Fix it!
2:30 pm - 3:45 pm
Tuyen Dinh
Unveil the Secret Behind Revit Model Performance: Why your Model is so Slow and How to Fix it!
2:30 pm - 3:45 pm
Tuyen Dinh
Model Management, Architecture
Intermediate
Autodesk

Speaker:
Tuyen Dinh, Coteccons

While model management is not an unfamiliar topic, people keep having trouble with a low performance model. Model controlling is not easy, but winning this deal is a great feeling. This session will explain what factors affect your model size and how to get beyond the limit.

Key Learning Outcomes:

  1. Understand QA&QC for Revit model and what factors affect model performance.
  2. Develop a model management strategy to keep your model clean and handy.
  3. Use Autodesk Model Checker for Revit to audit and back up model with a check-list.

Lab: Fun with FormIt Pro - A Lab to Hone your FormIt Skills
9:00 am - 10:15 am
Carl Storms
Lab: Fun with FormIt Pro - A Lab to Hone your FormIt Skills
9:00 am - 10:15 am
Carl Storms
Architecture, Visualisation
All Levels
Autodesk

Speaker:
Carl Storms, IMAGINiT Technologies

This Lab session will focus on some of the newer features of FormIt Pro, as well as Tips and Tricks to help with your FormIt Pro Workflow.

Key Learning Outcomes:

  1. Overview of what's new with FormIt Pro.
  2. The Dynamo Studio + FormIt Pro Workflow.
  3. Discover some work-arounds for those wish-list commands that aren't out yet.

Lab: Adapt or Die: Clever Ways to Exploit Adaptive Components for Your Everyday Design
10:45 am - 12:00 pm
Claudio Vittori Antisari
Lab: Adapt or Die: Clever Ways to Exploit Adaptive Components for Your Everyday Design
10:45 am - 12:00 pm
Claudio Vittori Antisari
Coding Content and Customisation, Architecture
Advanced
Autodesk

Speaker:
Claudio Vittori Antisari, Digital Strategies

Co-Speaker:
Chiara C. Rizzarda, Digital Strategies

Adaptive Components are a powerful tool and sometimes the answer to all those "this cannot be done in Revit" gibberish. This Lab will aim to highlight the few key concepts needed to master in order to understand their behaviour and will allow you to build something cool while doing so.

Key Learning Outcomes:

  1. Learn how to use Adaptive Components to create and manage complex geometries in Revit.
  2. Learn how to manage complex geometries without loosing buildability through Adaptive Components.
  3. Learn the best to quantify and estimate complex components.

Lab: MEPF Content That Works
1:00 pm - 2:15 pm
Dan Morrison
Lab: MEPF Content That Works
1:00 pm - 2:15 pm
Dan Morrison
MEP, Coding Content and Customisation
Guru
Autodesk

Speaker:
Dan Morrison, BIMtelligence

Mechanical. Electrical. Plumbing. Fire. These disciplines can have all the three dimensional complexity of Architectural or Structural (even more-so at times) but also have the added complexity of systems. This Lab session is about removing some of that complexity and using systems to improve performance of a project.

Key Learning Outcomes:

  1. Learn how to get systems to work in making Revit more efficient to use.
  2. Discover ways to improve your engineering by using Revit and systems.
  3. Create families with more power but also greater ease of use.

Lab: MEPF Content That Works
2:30 pm - 3:45 pm
Dan Morrison
Lab: MEPF Content That Works
2:30 pm - 3:45 pm
Dan Morrison
MEP, Coding Content and Customisation
Guru
Autodesk

Speaker:
Dan Morrison, BIMtelligence

Mechanical. Electrical. Plumbing. Fire. These disciplines can have all the three dimensional complexity of Architectural or Structural (even more-so at times) but also have the added complexity of systems. This Lab session is about removing some of that complexity and using systems to improve performance of a project

Key Learning Outcomes:

  1. Learn how to get systems to work in making Revit more efficient to use.
  2. Discover ways to improve your engineering by using Revit and systems.
  3. Create families with more power but also greater ease of use.

5 Apr - 7 Apr 2018