Schedule

30 Mar - 1 Apr 2017

Filter
Showing All
Level: All Levels
Level: Intermediate
Level: Advanced
Level: Expert
Level: Guru
Tag: Architecture
Tag: BIM
Tag: Business Strategy and Leadership
Tag: Civil
Tag: Coding, Content and Customisation
Tag: Construction and Fabrication
Tag: Estimation
Tag: General (multi-discipline)
Tag: MEP
Tag: Operations and Maintenance
Tag: Planning
Tag: Simulation and Analysis
Tag: Structure
Tag: Visualisation
7:30 am
8:00 am
8:30 am
9:00 am
9:30 am
10:00 am
10:30 am
11:00 am
11:30 am
12:00 pm
12:30 pm
1:00 pm
1:30 pm
2:00 pm
2:30 pm
3:00 pm
3:30 pm
4:00 pm
4:30 pm
5:00 pm
5:30 pm
6:00 pm
6:30 pm
7:00 pm
7:30 pm
8:00 pm
8:30 pm
9:00 pm
9:30 pm
10:00 pm
10:30 pm
Thu 30th
Thu 30th
Thu 30th
Welcome Tea & Coffee/Registration & Exhibition Open
7:30 am - 9:00 am
Doors to Plenary to open 15 minutes prior to event
Welcome Tea & Coffee/Registration & Exhibition Open
7:30 am - 9:00 am
Doors to Plenary to open 15 minutes prior to event
 
 

Chairman Introduction
9:00 am - 9:20 am
Wesley Benn
Chairman Introduction
 
 

Speaker:
Wesley Benn, RTC Events Management

Autodesk Sponsor Address
9:20 am - 9:30 am
Autodesk Sponsor Address
 
 

Proudly Sponsored by

HP | NVIDIA Sponsor Address
9:30 am - 9:40 am
HP | NVIDIA Sponsor Address
 
 

Proudly Sponsored by

Keynote Sponsor Address
9:40 am - 9:50 am
Keynote Sponsor Address
 
 

Proudly Sponsored by

Committee Address
9:50 am - 10:00 am
Committee Address
 
 

Speaker:
Phil Lazarus, Lendlease Asia

Looking Forward - Looking Back: The Catalysts And Opportunities From BIM and Beyond
10:00 am - 11:00 am
Peter Bowtell
Looking Forward - Looking Back: The Catalysts And Opportunities From BIM and Beyond
10:00 am - 11:00 am
Peter Bowtell
 
 

Speaker:
Peter Bowtell, Arup

Morning Tea
11:00 am - 11:30 am
Morning Tea
 
 

BIM 4 Analysis: Dealing with Complex Designs in an Energy Simulation
11:30 am - 12:45 pm
NCVK Srimannarayana
BIM 4 Analysis: Dealing with Complex Designs in an Energy Simulation
11:30 am - 12:45 pm
NCVK Srimannarayana
Simulation and Analysis, BIM, MEP
Advanced

Speaker:
Srimannarayana, Integrated Environmental Solutions

Discover the importance of building performance analysis in the BIM workflow, and how integration of these models is required due to the complex forms of today's designs. Through demonstrations and case studies, this session will show how our consulting department can create and capture performance data that's usable and accurate.

Key Learning Outcomes:

  1. Understand what is required by the engineer when they create a energy, and how the huge size and settings today's architectural models create a barrier to the importing process
  2. Understand of the requirement of integration of the BIM and energy model due to the complexity of today

Session 1.2
11:30 am - 12:45 pm
Session 1.2
11:30 am - 12:45 pm
 
 

Lunch
12:45 pm - 1:45 pm
Lunch
12:45 pm - 1:45 pm
 
 

"All-in-One" modelling?
1:45 pm - 3:00 pm
Dave Willard
"All-in-One" modelling?
1:45 pm - 3:00 pm
Dave Willard
General (multi-discipline), BIM, MEP
Intermediate

Speaker:
Dave Willard, B&V + AECOM Joint Venture

Take one Campus style project, with 2 facilities across the site. Many will have typically separated these models into separate Revit files, referenced together for coordination. We will take an in-depth look at how a multi-discipline practice uses an “All-In-One” Modeling approach to deliver BIM on a large scale project.

Key Learning Outcomes:

  1. Understand the benefits of "All-In-One" modelling on certain project types
  2. Learn how to prepare your Revit Project Template for "All-In-One" modelling
  3. Structuring "All-In-One" models to include general and typical detail sheets

Session 1.3
1:45 pm - 2:30 pm
Session 1.3
1:45 pm - 2:30 pm
 
 

Changeover
3:00 pm - 3:15 pm
Changeover
 
 

Revizto - Game Engine Technology brings Next Generation Design and Construction Coordination
3:15 pm - 4:30 pm
Revizto - Game Engine Technology brings Next Generation Design and Construction Coordination
3:15 pm - 4:30 pm

Session 1.4
3:15 pm - 4:30 pm
Session 1.4
3:15 pm - 4:30 pm
 
 

25 Flux/Dynamo Scripts for Everyday Use
3:15 pm - 4:30 pm
Dominic Martens
25 Flux/Dynamo Scripts for Everyday Use
3:15 pm - 4:30 pm
Dominic Martens
Coding, Content and Customisation, Architecture, BIM
All Levels

Speaker:
Dominic Martens, IGS Group / UNIFI / John Wardle Architects

Do you think Dynamo and Flux are only used by front end designers? or Do you think it is only used for Computational Design? Well, I'm here to show why you should be using Dynamo and Flux on every project to simplify your work.

Key Learning Outcomes:

  1. Learn what scripts to use to save you hours of work
  2. Learn how to interact with Dynamo and Flux for everyday use
  3. Learn how Dynamo and Flux can do the job of expensive Add-ins

Afternoon Tea
4:30 pm - 5:00 pm
Afternoon Tea
 
 

Session 1.5
5:00 pm - 5:45 pm
Session 1.5
5:00 pm - 5:45 pm
 
 

Data, Is It More Important Than The Model?
5:00 pm - 6:15 pm
Nathan Love
Data, Is It More Important Than The Model?
5:00 pm - 6:15 pm
Nathan Love
BIM, General (multi-discipline)
Advanced

Speaker:
Nathan Love

Is data more important than the model? On more and more projects we are being asked to deliver more and more data but the model stays the same. The models are checked but is the data? This is how we check, verify and validate the data in our models.

Key Learning Outcomes:

  1. Why is data becoming more important than the model
  2. How we extract and check data in Revit
  3. How we extract and check data in Solibri

Break
6:15 pm - 6:30 pm
Break
 
 

Welcome Function
6:30 pm - 8:30 pm
Welcome Function
6:30 pm - 8:30 pm
 
 

Location: Hibiscus Junior Ballroom (Exhibition area), Sands Expo and Convention Centre

Proudly Sponsored by

Enhancing Your Structural Detailing Skills
11:30 am - 12:45 pm
Nathan Love
Enhancing Your Structural Detailing Skills
11:30 am - 12:45 pm
Nathan Love
Structure, BIM
Advanced

Speaker:
Nathan Love

Concrete modelling concepts - benefits / restrictions when modelling floors, beams, slab edges, walls, setdowns; Creating hybrid families - 2D with some real smarts about them; Post Tensioning / rebar with 2D and 3D families; Steelwork detailing with 2D and 3D families; Utilising the latest Steel Connection centre

Key Learning Outcomes:

  1. Learn how to create hybrid families to add to your structural library
  2. Understand the concepts of benefits / restrictions when modelling various structural components
  3. Explore the pros and cons of using the latest Steel connection centre in Revit

Collaboration for Revit: Opening the Doors for Real Collaborative Project Execution
1:45 pm - 3:00 pm
Deepak Maini
Collaboration for Revit: Opening the Doors for Real Collaborative Project Execution
1:45 pm - 3:00 pm
Deepak Maini
BIM, Architecture, Structure
Advanced

Speaker:
Deepak Maini, Cadgroup Australia

This class focuses on explaining the concept of Collaboration for Revit (C4R).

Key Learning Outcomes:

  1. Understand the concept of Collaboration for Revit (C4R)
  2. Learn how to modify the Autodesk Revit models and Sync to the model on the cloud
  3. Update Autodesk Revit model with the changes in the linked model using C4R

Engagement Principles and Making It Work
3:15 pm - 4:30 pm
Dennis Burns and Gavin Urquhart
Engagement Principles and Making It Work
3:15 pm - 4:30 pm
Dennis Burns and Gavin Urquhart
BIM, General (multi-discipline), Visualisation
Advanced

Speaker:
Dennis Burns, Archaus

Co-Speaker:
Gavin Urquhart

There is potentially a disconnect between client, designers and Contractors on BIM Projects. We will show of how we were able to align all these parties and deliver a buildable model to the Contractor. The project is the 8 Storey 1 space carpark under construction for Wellington International Airport.

Key Learning Outcomes:

  1. The value of getting buy-in from the client
  2. The key role the BIM manager has in creating and agreeing the BEP
  3. Taking the agreed BEP and making it work

That Day Revit Came Into Our Life: Implementation Best Practices
5:00 pm - 6:15 pm
Claudio Vittori Antisari
That Day Revit Came Into Our Life: Implementation Best Practices
5:00 pm - 6:15 pm
Claudio Vittori Antisari
BIM, Business Strategy and Leadership
Advanced

Speaker:
Claudio Vittori Antisari, Antonio Citterio Patricia Viel

Co-Speaker:
Chiara Rizzarda

How many times have you heard somebody talking about inserting a BIM team in an architectural practice? Well, this is a different kind of story. This is the story of what happens when a whole multidisciplinary firm goes full BIM, from the concept girl to the coffee guy.

Key Learning Outcomes:

  1. Discover how to deal with Office Roles and Hierarchy, how to carry out Recruiting and Training Process
  2. Learn how to translate office Standards in Bim Standards
  3. Master how to showcase and demonstrate the Business Value of Revit

Implementing BIM In Your Organisation - How Hard Can It Be?
11:30 am - 12:45 pm
Dave Willard
Implementing BIM In Your Organisation - How Hard Can It Be?
11:30 am - 12:45 pm
Dave Willard
Business Strategy and Leadership, BIM
All Levels

Speaker:
Dave Willard, B&V + AECOM Joint Venture

Struggling to get buy in from staff and senior management? then this class is for you. Learn how to develop your ideas into a strategy that staff want to be part of and senior management want to buy into. We will also over software, training and development.

Key Learning Outcomes:

  1. Learn how to develop a BIM strategy that will address the needs of your senior management
  2. Learn how to develop a strategy that will addresses your training and development needs
  3. Learn how to gather data from surveys and other means to use as a baseline for current and future strategies

Integrated Project Delivery: Streamlining Project Delivery Processes
1:45 pm - 3:00 pm
Joseph Yau
Integrated Project Delivery: Streamlining Project Delivery Processes
1:45 pm - 3:00 pm
Joseph Yau
Business Strategy and Leadership, BIM, General (multi-discipline)
All Levels

Speaker:
Joseph Yau, DPR Construction, Asia Pacific

Collaborative BIM and VDC methods will allow projects to achieve productivity gain, cost savings, schedule certainty, and a higher quality product. However, current contracts and project set-up does not allow for these benefits to be achieved. Case studies have proven that Integrated Project Delivery supports BIM and VDC implementation.

Key Learning Outcomes:

  1. Understand the Value of IPD
  2. Learn how to Build the Foundations for VDC-Enabled Project
  3. Understand the Roles and Responsibilities of Project Stakeholders in an IPD project

Revit Rock Interior Design
3:15 pm - 4:30 pm
Takrit Jirawudomchai
Revit Rock Interior Design
3:15 pm - 4:30 pm
Takrit Jirawudomchai
Architecture, General (multi-discipline), Visualisation
Intermediate

Speaker:
Takrit Jirawudomchai , dwp

This session will cover Revit uses for interior design workflow included modelling, documentation, and collaboration with other consultants. This session will discuss the process according to project requirement, design stage and Revit for interior design best practice. Some tricks to prepare the Revit model for visualization, documentation and collaboration.

Key Learning Outcomes:

  1. Learn Revit workflow for interior design project
  2. Learn how to manage level of detail for interior design project
  3. Learn how to model and use the model for visualization and documentation

The Curious Case Of Customising BIM Execution Plan
5:00 pm - 6:15 pm
Benyatip Manajitt
The Curious Case Of Customising BIM Execution Plan
5:00 pm - 6:15 pm
Benyatip Manajitt
BIM, Business Strategy and Leadership, Construction and Fabrication
Intermediate

Speaker:
Benyatip Manajitt, Wisdom Consulting and Solution

Wisdom Consulting and Solution has customised BIM Execution Plan for Magnolia Quality Development into a more user-friendly system, a hybrid handbook between manual, guideline, instruction and standard.

Key Learning Outcomes:

  1. Sharing experience of Implementing BEP with construction industry in Thailand
  2. Modifying BEP to the needs of business
  3. Understanding construction industry in Thailand

YOU DID WHAT!!??!! | Bat-Shit Crazy Revit
11:30 am - 12:45 pm
Jay Zallan
YOU DID WHAT!!??!! | Bat-Shit Crazy Revit
11:30 am - 12:45 pm
Jay Zallan
General (multi-discipline), BIM, Business Strategy and Leadership
All Levels

Speaker:
Jay Zallan, Cuningham Group Architecture

The best!!! The worst!!! That's what we'll explore in this truly amazing session. There is a lot one can learn from seeing both the best and the worst done in Revit and this class will take an unflinching look at it all & give ideas to reach the loftiest goals.

Key Learning Outcomes:

  1. Learn how to reach your pinnacle in Revit by exercizing your creativity and curiousity
  2. Learn how to (possibly;) avoid construction mishaps that could have been avoided while in Revit
  3. You will learn to deal better with others' greatness as well as ineptitude

Virtual Reality for AEC: As Real as It Gets
1:45 pm - 3:00 pm
David Weinstein
Virtual Reality for AEC: As Real as It Gets
1:45 pm - 3:00 pm
David Weinstein
Visualisation,
All levels

Speaker:
David Weinstein, NVIDIA

Virtual Reality (VR) offers a unique ability to convey the size, space, and proportions of AEC designs so that you can experience what a new space will feel like long before construction has begun. This presentation will cover the benefits of VR, the technology that enables it, and what's on the horizon.

Key Learning Outcomes:

  1. Learn about the benefits of Virtual Reality for optimising AEC workflows.
  2. What hardware and software technical aspects to consider when implementing VR for design work.
  3. Hear compelling examples of how VR is used in AEC today that you too can adopt into your work.

Revizto - Game Engine Technology brings Next Generation Design and Construction Coordination
3:15 pm - 4:30 pm
Arman Gukasyan
Revizto - Game Engine Technology brings Next Generation Design and Construction Coordination
3:15 pm - 4:30 pm
Arman Gukasyan
Architecture
All Levels

Speaker:
Arman Gukasyan, Revizto

Co-Speaker:
Walter Wu, Soilbuild Construction Group

Revizto, a Virtual Design and Construction Manager’s dream and a project team’s tool of choice. Instantly convert your model to coordinate real-time in Virtual Reality, provide instant feedback and a seamless connection between, Revit, Navisworks and AutoCAD. An experienced user will share their Revizto workflows and best practices.

Key Learning Outcomes:

  1. Learn how can we better track and collaborate on 2D and 3D screenshots?  
  2. What are the workflows of other firms that I can incorporate on my next project?  
  3. What’s the future of augmented reality in construction look like? 

Visualisation: A Platform For Design And Collaboration
5:00 pm - 6:15 pm
Jorge Barrero
Visualisation: A Platform For Design And Collaboration
5:00 pm - 6:15 pm
Jorge Barrero
Architecture, BIM, Visualisation
All Levels

Speaker:
Jorge Barrero , HKS

This is a case study examination of the Los Angeles Rams stadium and two innovative projects in the Middle East. How is design complexity achievable and efficient between multidisciplinary international practices? This session looks at how a common digital visualisation platform is leveraged to facilitate collaboration and productivity between project teams.

Key Learning Outcomes:

  1. Gain an understanding of digital design workflows that facilitate rapid exploration of design iterations.
  2. Lessons learned from sharing visualization models and data across a common platform.
  3. The role of BIM in the current and future design pipeline.

LAB: Modular Door Families - Take a Test Drive
11:30 am - 12:45 pm
Andrew Milburn
LAB: Modular Door Families - Take a Test Drive
11:30 am - 12:45 pm
Andrew Milburn
Architecture, BIM, General (multi-discipline)
Intermediate

Speaker:
Andrew Milburn, Godwin Austen Johnson

Test drive a "mix and match" approach to building door families in this lab session. Assemble a variety of door configurations and place them in a collection file which will help a large team working with multiple linked files to maintain standards as the project evolves.

Key Learning Outcomes:

  1. Experience how a modular system for assembling door families works in practice
  2. Assess the value of a ""collection file"" for maintaining project standards
  3. Absorb the principles behind this system that you can then adapt to your own needs.

LAB: Revit Fabrication Parts - Design to Spooling Lab
1:45 pm - 3:00 pm
Ralph Schoch
LAB: Revit Fabrication Parts - Design to Spooling Lab
1:45 pm - 3:00 pm
Ralph Schoch
MEP, Construction and Fabrication
Intermediate

Speaker:
Ralph Schoch, Victaulic

Learn to take a Revit design model thru to fabrication spools exemplifying the advantages of using a singular model.

Key Learning Outcomes:

  1. Convert design model to Fabrication Parts.
  2. Create assemblies and schedules.
  3. Access data for fabrication.

LAB: Shared Nested Objects, Make Your Model Light, Efficient and Easy to Edit
3:15 pm - 4:30 pm
Joe Banks
LAB: Shared Nested Objects, Make Your Model Light, Efficient and Easy to Edit
3:15 pm - 4:30 pm
Joe Banks
BIM, General (multi-discipline)
Intermediate

Speaker:
Joe Banks, Nettleton Tribe

Using Shared nested objects can be tricky, but with this class you will leave confident that you can create and manage these families whilst saving time, file size and allowing less skilled users to create the content they need. Ultimately you will have a simpler more powerful Revit library.

Key Learning Outcomes:

  1. Understand how Shared nested components recycle geometry to keep file size down
  2. Create parent families with a type selector for nested elements and how to constrain these objects.
  3. Create a Window family ""Rig"" and nested panel family to enable you to rapidly create many window types.

LAB: Creating Structural Box Truss
5:00 pm - 6:15 pm
Yan Naing Bo
LAB: Creating Structural Box Truss
5:00 pm - 6:15 pm
Yan Naing Bo
BIM, Structure
Advanced

Speaker:
Yan Naing Bo, Surbana Jurong Consultants Pte. Ltd

Lab Presentation with step-by-step approach to create Structural BOX TRUSS with perfect concept of using Adaptive in Revit.

Key Learning Outcomes:

  1. Learn basic concept of Adaptive.
  2. Learn step-by-step creation of part of box truss in Adaptive.
  3. Learn how to develop complete box truss using adaptive

Fri 31st
Fri 31st
Fri 31st
Welcome Tea & Coffee/Registration Open
8:00 am - 9:30 am
Welcome Tea & Coffee/Registration Open
8:00 am - 9:30 am
 
 

BIM Today and Tomorrow
9:30 am - 10:15 am
Harlan Brumm
BIM Today and Tomorrow
9:30 am - 10:15 am
Architecture
All Levels

Speaker:
Harlan Brumm, Autodesk

Autodesk presents the latest advances in Building Information Modeling. Explore how Autodesk is supporting the future of making things and connecting design across AEC disciplines.

Key Learning Outcomes:

  1. Learn about the latest BIM technologies
  2. Discover some of the cool things brewing at Autodesk
  3. Learn how you can contribute to future of BIM

Proudly Sponsored by

Glorious Gadgets
10:15 am - 10:45 am
Wesley Benn and Chris Needham
Glorious Gadgets
General (multi-discipline)
All Levels

Speaker:
Wesley Benn
Co-Speaker:
Chris Needham

Proudly Sponsored by

Morning Tea/Exhibition Open
10:45 am - 11:30 am
Morning Tea/Exhibition Open
10:45 am - 11:30 am
 
 

Session 2.2
11:30 am - 12:15 pm
Session 2.2
11:30 am - 12:15 pm
 
 

Get Your 4D Game Tight with the BIMTroublemaker
11:30 am - 12:45 pm
Phil Lazarus
Get Your 4D Game Tight with the BIMTroublemaker
11:30 am - 12:45 pm
Phil Lazarus
BIM, Construction and Fabrication, Simulation & Analysis
Intermediate

Speaker:
Phil Lazarus, Lendlease Asia

The BIMTroublemaker is a righteous dude who has been doing BIM longer than you. He knows his shit and is throwing down knowledge about sequencing in revit and navis. Stills, animation, VR and evy'thing.

Key Learning Outcomes:

  1. How to make sequencing images in Revit using phases
  2. Streamlined linking between Revit and Scheduling software
  3. Getting your money's worth out of Navis

Lunch
12:45 pm - 1:45 pm
Lunch
12:45 pm - 1:45 pm
 
 

BIM Common Ground In Different Scales - NetZero Houses, LEED Platinum Building And A Green Campus
1:45 pm - 3:00 pm
Joseph Cory
BIM Common Ground In Different Scales - NetZero Houses, LEED Platinum Building And A Green Campus
1:45 pm - 3:00 pm
Joseph Cory
BIM, Architecture, Simulation & Analysis
All Levels

Speaker:
Joseph Cory, Geotectura

This article will show several case studies by Geotectura with different scale that were designed with BIM methods in order to achieve best sustainable aspects. The projects are different from each other by many parameters such as scale, budget, program but they share the same sustainable values and BIM approach.

Key Learning Outcomes:

  1. Adopting in-house capabilities using BIM for small architectural offices in order to achieve sustainable design
  2. Case studies in different scale that use BIM from the conceptual phase till the realisation of the project
  3. Augmented Reality and sustainable simulations integration with BIM workflow

Session 2.3
1:45 pm - 2:30 pm
Session 2.3
1:45 pm - 2:30 pm
 
 

Changeover
3:00 pm - 3:15 pm
Changeover
 
 

Customising BIM Strategy for Real Estate Project Development Cost
3:15 pm - 4:30 pm
Tamonvun Emsirisangtong
Customising BIM Strategy for Real Estate Project Development Cost
3:15 pm - 4:30 pm
Tamonvun Emsirisangtong
BIM, Business Strategy and Leadership, Estimation
Intermediate

Speaker:
Tamonvun Emsirisangtong, Wisdom Consulting and Solution Co., Ltd

A case study of L.P.N. Development PCL on how BIM strategy has been developed to improve cost estimation accuracy and fair construction fee negotiation.

Key Learning Outcomes:

  1. Understand the importance of customised BIM strategy according to the project target / owner business target
  2. Learn how to take advantage of organisation culture for BIM
  3. Learn how to set up Navisworks and BIM standard for quantities take off

Session 2.4
3:15 pm - 4:30 pm
Session 2.4
3:15 pm - 4:30 pm
 
 

Afternoon Tea
4:30 pm - 5:00 pm
Afternoon Tea
 
 

Session 2.5
5:00 pm - 5:45 pm
Session 2.5
5:00 pm - 5:45 pm
 
 

Information modelling for Interior Design - The Forgotten Discipline
5:00 pm - 6:15 pm
Chiara C. Rizzarda
Information modelling for Interior Design - The Forgotten Discipline
5:00 pm - 6:15 pm
Chiara C. Rizzarda
BIM, Architecture, Business Strategy and Leadership, Estimation, Visualisation
Intermediate

Speaker:
Chiara C. Rizzarda
Co-Speaker:
Claudio Vittori Antisari



Designing for interiors is an autonomous discipline with a whole different set of rules, and can improve its processes by going BIM: discover where are advantages and criticalities, and learn how to deal with its specific rules in order to set up your project and efficiently communicate your design.

Key Learning Outcomes:

  1. Identify and deal with interior design specific rules
  2. Set up library and project and efficiently communicate the design
  3. Carry out advanced detailing and documentation phase without ever leaving Revit

Break
6:15 pm - 6:45 pm
Break
 
 

Friday Evening Function
7:30 pm - 10:30 pm
Friday Evening Function
7:30 pm - 10:30 pm
 
 

Location: Stellar at Altitude - Level 62, 1 Raffles Place Complimentary shuttles will be provided to and from the Marina Bay Sands.

Proudly Sponsored by

Virtual Singapore, Building Blocks of a Smart City
11:30 am - 12:45 pm
Sonny Andalis
Virtual Singapore, Building Blocks of a Smart City
11:30 am - 12:45 pm
Sonny Andalis
Visualisation, General (multi-discipline)
All Levels

Speaker:
Sonny Andalis, Buidling & Construction Authority of Singapore

Virtual Singapore aims to be a central repository of maps and information to enable a Smart City a reality. It enables smart planning, data analytics and complex simulations. The programme will support the development of semantically enriched 3D model of Singapore which includes detailed information such as texture, geometry and topology of city objects and terrain attributes. Advanced information and modelling technology will allow dynamic and real-time data to be incorporated on top of static city data powered by BIM and GIS integration. A public version will be available in 218.

Key Learning Outcomes:

  1. What are photogrammetry and point clouds?
  2. Benefits of semantic information embedded in cityGML formats.
  3. Big data analytics and simulation for both planning and engineering.

Excellent Detailing and Presentation in Wall , Floor , Roof and Ceiling
1:45 pm - 3:00 pm
Behzad Meskini
Excellent Detailing and Presentation in Wall , Floor , Roof and Ceiling
1:45 pm - 3:00 pm
Behzad Meskini
Architecture, Construction and Fabrication, Estimation
Advanced

Speaker:
Behzad Meskini, Prism Co.

How we can create new ways to detail and present with Revit Architecture? Why we need to do this? This presentation will share a new perspective about the usage of families and combination between System families (Wall, floor, roof, ceiling) and loadable families. We explain about the new workflow to present these four element categories and the ability to present different levels of detail. In all situations we are looking to simplify the workflow and produce precise schedules. We will also look at many useful tricks in the modelling and detailing process.

Key Learning Outcomes:

  1. Explain new way in presentation and describe how we can improve Revit ability with simple tricks.
  2. New Usage for combination between Wall , Floor , Roof and Ceiling category and Family modelling.
  3. Change the prespevtive for detailing and modelling in Revit with new Rule.

Working With Collaboration Issues In Revit
3:15 pm - 4:30 pm
Robert Bell
Working With Collaboration Issues In Revit
3:15 pm - 4:30 pm
Robert Bell
General, Architecture, MEP
Intermediate

Speaker:
Robert Bell, Stantec

We do not all work in the same model on most projects. This leads to some interesting issues. This class will offer techniques and tips for dealing with some of these collaboration issues. If you work with external consultants, or even internal ones, this class will be of great value.

BIM Architecture Workflow - Tiny to Large Projects + Co-ordination in a Contractor’s Perspective
5:00 pm - 6:15 pm
Jorge Benéitez Gardeazabal, Eugenio Fontán Yanes, Zaw Lin Ye
BIM Architecture Workflow - Tiny to Large Projects + Co-ordination in a Contractor’s Perspective
5:00 pm - 6:15 pm
Jorge Benéitez Gardeazabal, Eugenio Fontán Yanes, Zaw Lin Ye
BIM
All Levels

Speaker:
Jorge Benéitez Gardeazabal, enzyme
Eugenio Fontán Yanes, enzyme
Zaw Lin Ye, Tiong Seng Contractors Pte Ltd
Using emerging technologies like BIMx and Rhino – Grasshopper – ARCHICAD live connection as a design workflow for projects from small to masterplan.

Key Learning Outcomes:

  1. Using emerging technologies like BIMx and parametric design to maximise the BIM benefits in Architectural design workflow
  2. Using technology for quality assurance and construction co-ordination to improve model based communication
  3. Using BIMx for impressive Architectural presentation

Start Your Engines: Keys to Implementing a Smooth Transition to BIM
11:30 am - 12:45 pm
Joel Martineau
Start Your Engines: Keys to Implementing a Smooth Transition to BIM
11:30 am - 12:45 pm
Joel Martineau
BIM, Business Strategy and Leadership, General (multi-discipline)
Intermediate

Speaker:
Joel Martineau, Stantec

The adoption of BIM is clouded with confusion over owner requirements, complying with LODs and deliverables such as COBie. This course discusses how to manage the transition to BIM while reaping the benefits of an improved process, without being overcome by the new strategies and workflows associated with successful implementation.

Key Learning Outcomes:

  1. Become familiar with the new requirements associated with BIM delivery, and understand that is not just a change in software, but a change in process.
  2. Become aware of how a BIM-enabled workflow impacts how we collaborate with consultants, from scope definition to element ownership.
  3. Identify tasks that can be made more efficient with the assistance of external tools and plug-ins in conjunction with Revit.

How To Bake Your Model: A Collaborative BIM Cooking Class
1:45 pm - 3:00 pm
Claudio Vittori Antisari
How To Bake Your Model: A Collaborative BIM Cooking Class
1:45 pm - 3:00 pm
Claudio Vittori Antisari
BIM, Architecture
Advanced

Speaker:
Claudio Vittori Antisari, Antonio Citterio Patricia Viel

Co-Speaker:
Chiara Rizzarda

Skyscrapers are good fun when it comes to BIM, but not all projects are the same: you might not be able to rely on modularity and scalability. You need a good mix of lateral thinking. Mix with model efficiency and collaborative procedures. Stir. Your project is ready to get built.

Key Learning Outcomes:

  1. Discover how to set up work: a model structure that maximizes efficiency
  2. Learn how to keep consistency between components within your files
  3. Gain the needed knowledge not to be scared by complex model structures

Real Time Rendering And VR For Revit
3:15 pm - 4:30 pm
Joe Banks
Real Time Rendering And VR For Revit
3:15 pm - 4:30 pm
Joe Banks
Visualisation, General (multi-discipline), Simulation & Analysis
All Levels

Speaker:
Joe Banks, Nettleton Tribe

Real time rendering is the only way to create a truly immersive 3D environment that a user can explore the virtual world with total freedom of movement, I will show a number of software options to get you from Revit to VR in as little as 2 clicks.

Key Learning Outcomes:

  1. See what quality outcomes can be achieved using real time rendering engine.
  2. Learn how to get to a VR ready output to enable the use of the oculus and HTC Vive headsets.
  3. Learn how real time rendering engines can be an amazing tool for model review and coordination.

Principles OF Structural Data Transfer: Autodesk Revit to Structural Analysis Integration
5:00 pm - 6:15 pm
Rexter Retana
Principles OF Structural Data Transfer: Autodesk Revit to Structural Analysis Integration
5:00 pm - 6:15 pm
Rexter Retana
Structure, Coding, Content and Customisation, Simulation & Analysis
All Levels

Speaker:
Rexter Retana, RSP Architects Planners & Engineers Pte Ltd

A technical presentation covering the principles and concepts of structural data transfer between common BIM authoring tool i.e. Revit and leading structural analysis software e.g. Robot Structural Analysis, Tekla Structural Designer, ETABS and CSC's Orion and Fastrak to ensure efficient and effective structural analysis integration.

Key Learning Outcomes:

  1. Understand common mistakes and pitfalls of Revit to structural analysis integration.
  2. Properly model Revit structural elements to ensure successful structural analysis integration.
  3. Understand the principles of structural data transfer by properly mapping Revit structural elements to structural analysis software prior to data exchange.

Stop Rendering and Start Exploring: Getting Started with Revit and Enscape
11:30 am - 12:45 pm
Phil Read
Stop Rendering and Start Exploring: Getting Started with Revit and Enscape
11:30 am - 12:45 pm
Phil Read
Visualisation, General (multi-discipline)
All Levels

Speaker:
Phil Read, Read | Thomas

Leveraging real-time technologies to successfully explore and present your Revit projects in virtual reality

Key Learning Outcomes:

  1. Important settings for Revit Family Components
  2. Best Practices for creating and assigning existing and custom materials
  3. Getting beautiful results from standard and custom lighting fixtures

Flux.io - User Success Stories and the Google Doc-ification of BIM Data
1:45 pm - 3:00 pm
Anthony Buckley-Thorp
Flux.io - User Success Stories and the Google Doc-ification of BIM Data
1:45 pm - 3:00 pm
Anthony Buckley-Thorp
General (multi-discipline)
All Levels

Speaker:
Anthony Buckley-Thorp, Flux Advanced Services + Technology, Flux.io

Flux is the glue that powers seamless design tool interoperability and web apps that liberate your BIM processes and facilitate easy-to-use data management workflows. Be inspired by how Flux has been applied on live construction projects to manage issues such as geometrical complexity, compatibility between software packages and broaden project team participation.

Key Learning Outcomes:

  1. 1. Learn how Flux.io users are employing next generation web technology on live projects.
  2. Learn how Flux-powered web apps are transforming the way that BIM data is shared, consumed and updated beyond the desktop.
  3. Learn about 'Flux the platform' and how to appify your BIM and data exchange workflows.

Your BIM Is Only As Good As Your Content - Manage it
3:15 pm - 4:30 pm
Mark Abrahams
Your BIM Is Only As Good As Your Content - Manage it
3:15 pm - 4:30 pm
Mark Abrahams
Coding, Content and Customisation, BIM, General (multi-discipline)
Advanced

Speaker:
Mark Abrahams, dwp|suters

Content management is a major factor for practices wishing to maintain a quality library that is easy for staff to use. This session reviews library organisation, hosting and sharing tools as well as a number of add-ins and workflows that make content management easier.

Key Learning Outcomes:

  1. Compare a number of great content library hosting and library browser applications for potential use within your office.
  2. Review a number of industry standards and guides in relation to content and earn the importance of element category based standards
  3. Look at a number of add-ins and workflows that can easily be used to assist in the ongoing management of your companies content library.

To Link or not to Link? Managing Large-scale Revit Models
5:00 pm - 6:15 pm
Renee Jain
To Link or not to Link? Managing Large-scale Revit Models
5:00 pm - 6:15 pm
Renee Jain
Architecture, BIM, Visualisation
Intermediate

Speaker:
Renee Jain, Ren Architecture

Do you struggle with maintaining repetitive multi-unit projects in Revit? Wish there was a better way? For housing, hotels, multiple buildings and more, links are the key to working effectively! Parse the building down, break it into manageable chunks, and model the pieces of the design with links and groups.

Key Learning Outcomes:

  1. Learn how to effectively manage units in large-scale projects
  2. Identify when to use Revit links or groups or both
  3. How to manage multiple building links

LAB: Navisworks Clash Detection: Saving Time and $$$ by setting up Clash Templates
11:30 am - 12:45 pm
Deepak Maini
LAB: Navisworks Clash Detection: Saving Time and $$$ by setting up Clash Templates
11:30 am - 12:45 pm
Deepak Maini
BIM, General (multi-discipline), Simulation & Analysis
Expert

Speaker:
Deepak Maini, Cadgroup Australia

With clash detection becoming an integral part of all BIM execution plans, this lab focuses on showing attendees how they can set up clash templates and reuse them in their projects.

Key Learning Outcomes:

  1. Create Search Sets Based on Standard Revit Element Categories
  2. Perform Clash Tests Based on Search Sets
  3. Export and Import the Clash Template with the Clash Tests

LAB: Making MEP Families Easier
1:45 pm - 3:00 pm
Dan Morrison
LAB: Making MEP Families Easier
1:45 pm - 3:00 pm
Dan Morrison
MEP, BIM, Coding, Content and Customisation
Expert

Speaker:
Dan Morrison, BIMTelligence

A simple family is a good family right? If your average user struggles to understand how your family is meant to work then what is the use of having all the bells and whistles? Well - what if you could do both

LAB: Autodesk Revit Structure - Creating Templates and Standards To Streamline Workflow
3:15 pm - 4:30 pm
Rexter Retana
LAB: Autodesk Revit Structure - Creating Templates and Standards To Streamline Workflow
3:15 pm - 4:30 pm
Rexter Retana
Structure, BIM
Advanced

Speaker:
Rexter Retana
This class will cover a combination of best practices on how to set up and manage multidiscipline collaboration, creating templates that automate production and general model management principles including using scope boxes, filters, various types of schedules and managing CAD files for large multiuser projects. What else is there?

Key Learning Outcomes:

  1. Create templates that address browser organisation, important shared parameters for QA, families with pre-selected materials, schedules to calculate reinforcement, steel & concrete tonnages and title sheets
  2. Define standards and protocols for multidiscipline collaboration
  3. Apply general model management principles that address processes, File Maintenance and managing CAD files

LAB: Adaptive Components: Beyond The Component
5:00 pm - 6:15 pm
Jason Chen
LAB: Adaptive Components: Beyond The Component
5:00 pm - 6:15 pm
Jason Chen
BIM, Architecture, General (multi-discipline)
Intermediate

Speaker:
Jason Chen, HLW International LLP

Adaptive components are always discussed at the individual element level. But what if we start to use adaptive components to model whole sections of a building. In this lab we will explore how we can utilize adaptive components in a conceptual mass to model a an enclosed sky bridge.

Key Learning Outcomes:

  1. How to utilize a conceptual model with adaptive components to model whole parts of buildings.
  2. How to simpler adaptive components can be used in combination to create more complex models.
  3. The possibilities of using these conceptual models with Global parameters and Dynamo.

Sat 1st
Sat 1st
Sat 1st
Welcome Tea & Coffee
8:00 am - 9:00 am
Welcome Tea & Coffee
8:00 am - 9:00 am
 
 

Session 3.1
9:00 am - 9:45 am
Session 3.1
9:00 am - 9:45 am
 
 

Applying Design Thinking: Develop, Validate, and Persuade Adoption Of New BIM Standards
9:00 am - 10:15 am
Elaine Lee
Applying Design Thinking: Develop, Validate, and Persuade Adoption Of New BIM Standards
9:00 am - 10:15 am
Elaine Lee
BIM, Architecture, General (multi-discipline)
All Levels

Speaker:
Elaine Lee, Perkins Eastman

Participate in a workshop to evaluate which is more valuable: workflows that are efficient efforts or fast efforts in Revit. An active discussion about applying Design Thinking to evaluate ideas for developing potential tools for design documentation.

Key Learning Outcomes:

  1. Determine when to use quick and dirty solutions, hacks, or a standardized system for efficiency, through empathy about the project pressures our peers experience
  2. Apply the process of Design Thinking to generate solutions, and then to validate if potential solutions can benefit project work efforts from a peer's perspective
  3. Apply the process of prototyping to quickly develop a potential solution, testing for viability to incorporate into project work efforts

Morning Tea/Exhibition Open
10:15 am - 10:45 am
Morning Tea/Exhibition Open
 
 

Session 3.2
10:45 am - 11:30 am
Session 3.2
10:45 am - 11:30 am
 
 

BIM Review Procedure for Successful Project Delivery
10:45 am - 12:00 pm
Erezi Utiome
BIM Review Procedure for Successful Project Delivery
10:45 am - 12:00 pm
Erezi Utiome
BIM, Business Strategy and Leadership, General (multi-discipline)
All Levels

Speaker:
Erezi Utiome, AECOM

This session presents the challenges and outcomes from implementing a BIM Review Procedure (BRP) and explores risk assessment and management strategies. Furthermore, it will highlight the cardinal role of BIM Management Plans in ensuring successful project delivery and show how the BRP can aid the development of business intelligence.

Key Learning Outcomes:

  1. Learn how to set up BIM projects for success by leveraging the BI Management / Execution Plan
  2. Learn the resource requirements for organising and implementing BIM Review Procedures
  3. Learn how to assure Information Quality aligned with Clients' requirements

Lunch
12:00 pm - 1:00 pm
Lunch
12:00 pm - 1:00 pm
 
 

Session 3.3
1:00 pm - 2:15 pm
Session 3.3
1:00 pm - 2:15 pm
 
 

Manufacturers Global Content Strategy 101: From Inferior to Superior! - MOVED FROM 2.5 - CURRENTLY ON HOLD AS MARCUS CAN'T ATTEND
1:00 pm - 2:15 pm
Manufacturers Global Content Strategy 101: From Inferior to Superior! - MOVED FROM 2.5 - CURRENTLY ON HOLD AS MARCUS CAN'T ATTEND
1:00 pm - 2:15 pm
Business Strategy and Leadership, Coding, Content and Customisation, MEP
Intermediate

Speaker:
Marcus Fich, Grundfos Holding A/S

Has your content ever been called bloated? Are you struggling with meeting your customers different demands for content? Then this forum is for you. Get the run-down of how Grundfos went from having inferior to superior BIM content - avoid making the same mistakes as we did! BIM Strategy Simplified!

Key Learning Outcomes:

  1. Learn how to formulate and execute your BIM strategy and business case.
  2. Learn how supporting differentiating customer needs does not have to be a costly, slow and manual process.
  3. Learn that you do not have to be a Revit expert to create a successful BIM setup.

Changeover
2:15 pm - 2:30 pm
Changeover
 
 

TBC
2:30 pm - 3:45 pm
TBC
2:30 pm - 3:45 pm
 
 

Session 3.4
2:30 pm - 3:15 pm
Session 3.4
2:30 pm - 3:15 pm
 
 

Afternoon Tea
3:45 pm - 4:15 pm
Afternoon Tea
 
 

Wrap Up
4:15 pm - 5:45 pm
Wesley Benn
Wrap Up
4:15 pm - 5:45 pm
Wesley Benn
 
 

Speaker:
Wesley Benn, RTC Events Management

Changeover
5:45 pm - 6:00 pm
Changeover
 
 

Speaker Debrief
6:00 pm - 6:45 pm
Wesley Benn
Speaker Debrief
6:00 pm - 6:45 pm
 
 

Speaker:
Wesley Benn, RTC Events Management

Break
6:45 pm - 7:15 pm
Break
 
 

Drinks
7:15 pm - 7:45 pm
Drinks
 
 

BIM+FM Case Study: Sydney Opera House BIM Interface Project
9:00 am - 10:15 am
Chris Needham
BIM+FM Case Study: Sydney Opera House BIM Interface Project
9:00 am - 10:15 am
Chris Needham
Operation and Maintenance, BIM
All Levels

Speaker:
Chris Needham, AECOM

This presentation will focus on a case study: the Sydney Opera House, with its ‘BIM+FM Interface’ project. Topics to be covered will include as-built model specifications, data schemas, database integration, information use cases and more.

Key Learning Outcomes:

  1. Learn of some of the key considerations for successful implementation of BIM for FM purposes.
  2. Learn why and how the notion of as-built models must change if BIM is to really provide greater value to a building's operational lifecycle.
  3. Learn some of the challenges associated with integration of multiple data sources.

Collaboration Tools And Methods Comparison
10:45 am - 12:00 pm
Joe Banks
Collaboration Tools And Methods Comparison
10:45 am - 12:00 pm
Joe Banks
BIM, General (multi-discipline)
All Levels

Speaker:
Joe Banks, Nettleton Tribe

Collaboration , what's it all about and how do we do it? Let me show you what options are available and walk you through the pros and cons of everything out there right now. We will also look at what we could and should be doing in the future.

Key Learning Outcomes:

  1. Understand the different options available for collaboration today, so you can make an informed choice.
  2. Understand the hardware solutions available for collaboration right now
  3. Understand the benefits and issues with real time model collaboration

Modelling for 5D Quantities: A BIM Manager
1:00 pm - 2:15 pm
Scott Beazley
Modelling for 5D Quantities: A BIM Manager
1:00 pm - 2:15 pm
Scott Beazley
General (multi-discipline), BIM, Estimation
Intermediate

Speaker:
Scott Beazley, Mitchell Brandtman

A BIM Manager's guide for specifying model content to enable better 5D quantity generation from models. Modelling setup techniques, software limitations, and common pitfalls will be covered, to provide shared confidence of expected quantity use. Real world projects will be used as examples.

Key Learning Outcomes:

  1. Overview of quantification methods from building models over project life cycle.
  2. Definition of specific object property data required at different project phases.
  3. Investigate model construction and data standards required to access useful extraction of quantities for estimation and cost planning.

The Use Of BIM During Construction. A Case Study And Analysis Of 4D And 5D Methods And Tools
2:30 pm - 3:45 pm
Dominik Schleipen
The Use Of BIM During Construction. A Case Study And Analysis Of 4D And 5D Methods And Tools
2:30 pm - 3:45 pm
Dominik Schleipen
Construction and Fabrication, BIM, Construction and Fabrication
Intermediate

Speaker:
Dominik Schleipen, Mott MacDonald

The Use of BIM during construction stages: Sharing experiences from working with main contractors Leighton/Gammon on the West Kowloon terminus. Concepts around coordination of digital models for fabrication and a review of tested and proposed 4D and 5D BIM applications.

Key Learning Outcomes:

  1. Understanding key advantages and issues of the use of BIM during construction
  2. Overview on key tools relatin gto 4D and 5D
  3. Understanding of Data Flow principles and conversion of formats

Taking BIM For Structural Engineering To The Limits
9:00 am - 10:15 am
Matt Wash
Taking BIM For Structural Engineering To The Limits
9:00 am - 10:15 am
Matt Wash
Structure, BIM
All Levels

Speaker:
Matt Wash, Arup

Matt will present new workflows to increase productivity and minimize the waste caused in the design and documentation of structural engineering software. The class will focus on interoperability between analysis software and Building Information modelling (BIM) tools, with a focus on Revit building design software as the primary documentation model.

Key Learning Outcomes:

  1. Learn how to make the most of collaborative workflows between the architect and engineer to maximize efficiency and minimize waste in the design and delivery of structural engineering solutions
  2. Learn how to optimise structural solutions to provide sustainable design choices that are buildable and cost-effective
  3. Understand the needs of all stakeholders in all phases of the lifecycle of a project, and learn how your design can be flexible to accommodate future changes

Making MEP Efficient
10:45 am - 12:00 pm
Dan Morrison
Making MEP Efficient
10:45 am - 12:00 pm
Dan Morrison
MEP, BIM, General (multi-discipline)
Intermediate

Speaker:
Dan Morrison, BIMTelligence

Modelling MEP is often a thankless task, with cost blowouts often the norm. In this presentation you will be shown how to use MEP Systems to your advantage, and how to deal with costly coordination. To model efficiently in Revit MEP - quite often, less is more.

Key Learning Outcomes:

  1. What is important to avoid in your BIM Process
  2. Learn ways to use MEP Systems to improve your efficiency
  3. Find out the best ways to collaborate across different disciplines, different software and different locations

Parameter swaps and the hunt for the mythical content unicorn!
1:00 pm - 2:15 pm
Dominic Martens
Parameter swaps and the hunt for the mythical content unicorn!
1:00 pm - 2:15 pm
Dominic Martens
Business Strategy and Leadership, BIM, Coding, Content and Customisation
All Levels

Speaker:
Dominic Martens, IGS Group / UNIFI / John Wardle Architects

We all struggle with content. It's never quite right. Either we embed too little data or too much. To make matters even worse, you all have different ideas on 'what is good' content. We refer to that perfect piece of content as a 'content unicorn'; content that's too good to be true - nevertheless we are on the hunt for it. In this thriller of a session you will hear from both the content commissioner and content creator as Grundfos & Unifi sets out on a global hunt for the mythical content unicorn that delivers content everybody wants in their library. We will show from both sides of the content provisioning table how the content unicorn is becoming a feasible reality.

BIM To VR Via FREE Gaming Engine
2:30 pm - 3:45 pm
Dominic Martens
BIM To VR Via FREE Gaming Engine
2:30 pm - 3:45 pm
Dominic Martens
Visualisation, General (multi-discipline), Simulation & Analysis
All Levels

Speaker:
Dominic Martens, IGS Group / UNIFI / John Wardle Architects

Going from Revit/Rhino/Sketch up/ArchiCAD to Virtual Reality has always been a costly task to get a render quality result, I'm here to show you that with a few free programs it only takes time and knowledge to impress the Client or Boss.

Key Learning Outcomes:

  1. Learn how to export your model to Unreal
  2. Learn how to setup your VR model in Unreal
  3. Learn how to take your VR model to the next level

Using Dynamo To Design Environmentally-Responsive Building Skin
9:00 am - 10:15 am
Zhifei Cheng
Using Dynamo To Design Environmentally-Responsive Building Skin
9:00 am - 10:15 am
Zhifei Cheng
BIM, Architecture, Simulation & Analysis
Intermediate

Speaker:
Zhifei Cheng, Gensler

Designing responsive building skin with Grasshopper in Rhino and then importing into Revit takes time, results in inaccuracy, and the geometries cannot be easily documented. This research tries to use Dynamo and its add-ins for Revit to unify the workflow and reduce the tool chain thus improving the design efficiency.

Key Learning Outcomes:

  1. Learn how to use Dynamo to generate building skin prototypes
  2. Learn how to make the building prototypes respond to sun path
  3. Learn how to analyze the performance of the building skin in Ladybug, Honeybee and native Revit anaylzing tools

Strategising Mega Project
10:45 am - 12:00 pm
Kelvin Tam
Strategising Mega Project
10:45 am - 12:00 pm
Kelvin Tam
Architecture, BIM
Intermediate

Speaker:
Kelvin Tam, DP Architects

Mega residential project of 4+ structures requires repetition of 3+ unit types and 2+ prototype floors in 3+ towers. What is the best modelling strategy to deal with it? Groups, links, families? We need an innovative method.

Key Learning Outcomes:

  1. Learn to strategise linking in a mega project
  2. Learn to evaluate different strategies: group, link and family
  3. Learn to maintain and manage numerous models and contents in a mega project

Steel Structure Detailing With Autodesk Inventor And iLogic
1:00 pm - 2:15 pm
Behzad Meskini
Steel Structure Detailing With Autodesk Inventor And iLogic
1:00 pm - 2:15 pm
Behzad Meskini
Construction and Fabrication, BIM, Structure
Expert

Speaker:
Behzad Meskini, Prism Co.

Create primary part for steel structure and use i Logic rule for them, Create assembly from iLogic parts and make your assembly , final step will be documentation and you can have your own BOM.

Key Learning Outcomes:

  1. What is the base idea and rule for create primary part for steel structure as we need in Inventor and use i Logic rule for them
  2. How we can Create assembly from iLogic part and make whole of structure
  3. What about documentation and how we can get BOM from models.

Routing Pipe over the Curve
2:30 pm - 3:45 pm
Ralph Schoch
Routing Pipe over the Curve
2:30 pm - 3:45 pm
Ralph Schoch
MEP, Visualisation
All Levels

Speaker:
Ralph Schoch, Victaulic

What does it take to route piping on an Arch in Qatar or creating bent pipe runs in Nova Scotia? We demonstrate techniques used to get the job done. From project settings to special families with engineering constraints built in we give you samples to test on your next project.

Key Learning Outcomes:

  1. Learn how to make routing in Revit as fast as possible for your team.
  2. Take the mystery out of routing errors in the project.
  3. Learn tips when vetting manufacture content.

LAB: Study Case: MTR Disneyland Resort Line Sunny Bay Station
9:00 am - 10:15 am
Arthur Gunawan
LAB: Study Case: MTR Disneyland Resort Line Sunny Bay Station
9:00 am - 10:15 am
Arthur Gunawan
Architecture, Architecture, BIM, Visualisation
Intermediate

Speaker:
Arthur Gunawan, Aedas

Free form Tensile Roof Structure Modelling in Revit.

Key Learning Outcomes:

  1. Learn Free Form Modelling in Revit
  2. Learn to make use of adaptive component
  3. optimise Model for Realtime Rendering/Walkthrough

LAB: Super-Size Me! Taking documentation to the next level.
10:45 am - 12:00 pm
Paul Hudson
LAB: Super-Size Me! Taking documentation to the next level.
10:45 am - 12:00 pm
Paul Hudson
Architecture, General (multi-discipline)
Intermediate

Speaker:
Paul Hudson, archaus

There is a fundamental flaw in the way we create graphical schedules in Revit. We are creating "dumb" data that isn't linked to modelled information. This leads to duplication, discrepancies and loss in productivity. This class shows how a few simple out of the box techniques can minimise these discrepancies.

Key Learning Outcomes:

  1. Learn how to make Revit work for you with graphical schedules.
  2. Learn how to minimise discrepancies, reduce duplication, and speed up documentation with graphical schedules that are linked to real model data.
  3. Learn how to create shared parameters and "Super Tags" that can be used to document data from component and system families.

LAB: Dynamise Your Facade with Operations and Optimisations (Part A & B)
1:00 pm - 3:45 pm
Ritesh Chandawar and Adriel Sim
LAB: Dynamise Your Facade with Operations and Optimisations (Part A & B)
1:00 pm - 3:45 pm
Ritesh Chandawar and Adriel Sim
Architecture, Simulation & Analysis
Intermediate

Speaker:
Ritesh Chandawar, Autodesk Asis Pte Ltd, Singapore
Co-Speaker:
Adriel Sim, Chng and Sim Associates Pte Ltd

A high performance facade is able to respond to a building's external environment, while still achieving design excellence. It requires countless permutations, which may be heavy and time consuming when done in Revit. With a lighter and faster Dynamo, a high performance facade is within your reach.

Key Learning Outcomes:

  1. Geometrical operations such as lofting multiple profiles and customised sub-divisions.
  2. Optimisation operations such as parameterising your fa

30 Mar - 1 Apr 2017